What Have You Done To Your 3rd Gen Today?

So this all wasn’t today, but it was this week! Firstly installed the stinger heigh10 to replace my severely outdated entune unit. Install wasn’t that hard outside of working through the massive amount of wiring they send you. Not to mention this screen is massive compared to my old 5 inch screen.



Then I installed the ARB twin compressor with the SLEE off-road mount. It’s tight quarters but man this thing mounts up tight! The worst part once again was wiring on this but only bc I used a CH4x4 switch instead of the supplied ARB switch.







And lastly I popped in a throttle grenade and called it a week!

 

I installed a front camera on my 2021 using a bracket that I 3D printed. Took me 5 tries to get the bracket right, about .25 in filament each print. About 45 minute each print.

 

Have a link to that head unit? Very cool- also does it retain maintenance section?

 

so for me I maintained everything except lock controls and the beep volume. Whatever you have it set as once the old unit is removed it what will remain. It will just depend on your particular head unit what is lost.

https://stingeroffroad.com/products...a3MohUHZmywzb4YkZUrJpo4jdZp8XDRBoCfFsQAvD_BwE

 

Just a weekend getaway to the Grand Canyon! Filled up for $120

 

Wash, clay, wax.........................then, of course, it rains. At least it has something on the paint

 

What tool(s) did you use for the cutting/trimming?

 

Ouch

 

Gonna try and do mine tommorow as well. Looks sweet!! Did you end up drilling the OEM one out or dropped the headliner? How much about did you have to widen the holes on the cab?

 

Bilstein 6112/5160, Headstrong Off-Road 3 leaf pack, Toytec sway bar relocation kit, and Method Racing 17x8.5 0-offset NV 305 Double Black.

 

Badged today.

Yesterday had the oil changed, tire rotation, alignment, brake inspection at Black’s Tire - Free rotations if you had em mounted there. Score. They said I have 60% brake life left at 65k miles. Mind blown.

 

I drilled the rivets out and did not have to widen the holes on the cab, at all. I filed about 1/8 of an inch off the inside of the two end holes on the Meso housing. I also gooped the shit out of it with RTV around all wire holes.

 

How sad this is BS, I WONT GIVE UP MY COMBUSTION ENGINE….

 

Didn't take a picture of the finished product.
But i did two layers of sound proofing on the roof.
HUGE reduction in wind noise when the roof rack is deployed. So now I have sound proofing on the whole cab. Every inch. 2 layers in some places.
Such a big difference in sound and keeping the AC in. Lot of work but well worth it.

 

noico?

 

question man, do you retain the compass tab and media tab in the main gauge, and did they include you the OBD connection for the heigh 10.

 

S2 sports as chase lights installed on roof rack:

 

Yep

 

Added a pair of Rigid SRQ flood lights for loading the boat at night, etc...

 

How's the sound quality?