JBA Clearance Question

I have the JBA STD UCAs which are great. According to JBA's website there are recommendations on what Tire/Wheels spec will clear the UCAs 285/70/17(specifically 17x8.5 with 0 offset & 4.75" BS). JBA's website says the above combo should give you 0.125" on clearance @ full lock.


My question is "Can anyone running the same setup of Tire/Wheel Combo validate the clearance to be enough?

*Any help of tire & wheel recommendation is welcomed

 

I have JBA control arms and am running 285/70R17 tires with a 17x8.5 -10 offset wheel and have plenty of clearance at full lock. Previously I had TRD 4runner sema pro wheels which are 17x7 +4 offset (4.5" BS) and they rubbed at full lock on the control arms.

 

I just ordered SCS Stealth 6 17x8.5 (-10 offset). Took me a while since SCS wheels seemed to always be on backorder. For your setup was a CMC needed? Planning on 285/70/17 BFG KO2.

Thanks again.

 

Yes, a CMC is highly recommended with 285s.

 

Yes I needed a CMC

 

Always cmc with 285s unless you're a pavement princess.