NEED HELP WITH LIFT KIT!

I have noooooo clue what to buy. i wanna do a suspension lift and i have no clue what all to buy. i dont know whats in a complete kit.
I need some real help. so if you got advice, feel free to help me out!

 

really depends on what you wanna do and how much you wanna spend. go to wheelersoffroad.com and check out some of what they have. take a look at a full ome kit.

by the way...welcome to tw. what part of sc are ya from?

 

What's your budget and how much lift do you want?

Also take a look at

 

tacomaman06 im from columbia. and thanks for the tip about wheelersoffroad.com
i really got have alot of money for a kit right now. i was thinking about doing gettin 3 inch spacers...its less expensive and less work on the truck

 

spacers will be ok, if you plan to not off road that much/save money. but they can put extra strain on the stock shocks/coils and snap them

 

oh...well i go hunting alot and my hunt club is a bunch of hills and rocks so maybe spacers arent the right choice.

 

http://downsouthmotorsports.com/i-1...pre-runner-4wd-front-pre-load-adjustable.html

+ an AAL for the rear.

 

Thats 184.00 for both front shocks at downsouthmotorsports.com?

 

X2 can't go wrong with that setup. I wouldn't go the the spacer route for sure. I made my mistake jumping the gun and getting a spacer lift when I got my truck and now am going back and putting on eibach coils+5100s and a 2" aal.
Should have it all on soon and now wont have to worry about busting a strut or something like that when I'm offroad.

 

Yes 185$ for both front shocks. You'll need new rears if you want to lift the rear more than one inch. Atleast I did on my 2nd gen idk about 1st gens. I would imagine it'd be the same thing.

 

True. i just have no clue whats good. alot of people have told me billy 5100s. i need a good deal too...money's tight

 

Yep.

 

alright. thats not that bad. i wanna do a 3'' lift.

 

If you are dead set on 3" instead of 2.5, you can run a thin top plate spacer on top of the billys. If you go over 2.5" though, with any lift, you'll likely need new UCA's, which cost around $500.

 

Im not set on it. i can do 2.5'', 3'' was just my first idea. 2.5 will still look good. its not that big a difference.

 

thanks!

 

Candice......I'm taking my 5100's off very soon......ill sell them to you at a good price. Right close to 20k on them.......and you can use the fronts for 2.5 inches of lift. Will sell you the rear 5100s as well if you want them. Just pm me if interested.

 

Will do man.

 

sent you a pm.