What Have You Done To Your 3rd Gen Today?

care to show some pictures/talk more about the fan setup? I've thought of doing the same

 

I got the vinyl grey set. Noticed that the bump/wing on the driver's seat was wearing from getting in and out (I guess from my big butt rubbing on it,lol)! So I hope that these will hold up well.

 

Drove it to gym/walmart

 

And the tint

 

Installed the TRD Pro grill with amber raptor lights and smoked turn signals.

 

I’ll post a separate installation thread showing details for this, several people interested… later today or tomorrow.

 

Got rid if the seat belt beeping speaker. Also found a Taco behind the instrument cluster....

 

Replaced my halogen low beams with Philips H9’s.Philips 12361B1 H9 Standard Halogen Replacement Headlight Bulb, 1 Pack

$11 Philips 12361B1 H9 Standard Halogen Replacement Headlight Bulb, 1 Pack

https://www.amazon.com/dp/B003YMPN3A

Much better lighting! You just have to snip off the top notch to make them fit:

 

Taco Easter Egg, Behind Dash Cluster | Tacoma World

 

I was looking to do the same was curious on how much it actually improved

 

Quite a bit of improvement, it should do better than the stock on wet black pavement and off-road at night. Pretty cheap mod, try it.

The projector reflectors are set for the right focus for a halogen bulb filament, so it looks normal if you stay with them.
I didn’t even have to readjust my headlights after the swap.

LED’s have the wrong shape for the reflectors and throw a weird pattern, so that’s why you need to update the whole light assembly with them if you want more normal and focused LED lighting.

 

A good idea. Might pick those up. That is an area that takes a beating on rocks.

 

The curtain airbags are actually located behind the headliner and run the length of the cab from the A-pillar to the C-pillar just above the top of the door sill. When the curtain bags deploy they push the headliner down and usually deform it along that edge. The grab handles are attached in such a way that they break free of the cab mounts thus assisting the headliner deformation but stay attached to the headliner itself to avoid becoming a projectile. I’m sure the airbag would deform the Molle panel upon deployment instead of sending it into an occupants head. I just wouldn’t want to be the one to test that theory lol.

 

Yikes!

 

Got my 3d printed left switch panel from etsy from Fitzaprint. Since I was a repeat customer he gave me a little cool 3d printed Taco too.

 

how long ago did you buy those? they've been OOS forever

 

Not the first time a Tacoma owners rescued a Jeep owner

Couldn’t miss the opportunity but all kidding aside, glad the kids okay.

 

This is cool! Might need to fire up the laser and make something out of this. Trailer hitch receiver plug? Definitely going to be some sort of wall art for the garage though.

 

Picking up a Leer dcu tomorrow.
Any tips on the future build? Trying to convince the wife of bed camping.

 

Added a pormido triple dash cam. Removed the factory mirror and hid the wiring in the headliner. Used the factory wire cover as well. Front cam is getting moved so I don't care about that wire right now. Planning on extending the camera wires to the front grille and inside the bed. Don't need to see in the cab or what my eyes see.
@ClassyTacos still running this?