Stock rims...

Will 285/75x17 Nitto Terra Grappler fit on stock 17" rims with a 2.25" front lift, and a 1" rear lift without rubbing (should have added that)?

 

Will they fit on the rims? Of course. Will they fit without rubbing? Depends how good your alignment guy is.

 

Thanks!

 

they will rub

 

Will they fit on a 17x9 wheel if I put 265/65r17 on them and not rub?

I have a 22 offroad stock height

 

265/65/17 is the same size as the stock 265/70/16... so yes, they'll fit just fine.

 

the 17x9 wheel has a -12 offset....will that change anything?

 

You will rub upper control arm. Put your hand over the top of tire with stock size on now. You barely can fit your fingers between tire and upper control arm, as is from stock. You would need wheel spacers, not to rub with 285's.

 

If I were to go with Fuel Mavericks 17x9 0 offset instead of -12 will that work?

I have also found Fuel Mavericks d536 in 18x9 0 offset and can get Grappler g2s in size 265/60 18..the tire is same width & height as factory tire 265/70 16..so If it will work with 17x9s ..shouldn't it work with 18x9?

I'm at stock height and do very little offroading.

Either way I have both in the cart ready to buy.....

 

I would guess you'll be more than fine with -12. Honestly, you could probably go 265/70/17 with those rims and be fine. I ran 265/75/16s on stock OR wheels (16x7) with 1.25" spacers (effectively -6 offset) and never rubbed and never trimmed anything.

I'm on 285/75/17s (RR7-H 17x8.5 with -12) now and had to cmc, trim, and heat mold fender liners and still rub lol