Oregon and Washington BS thread

I'm not sure what it is. I mark all my alignment cams with a permanent marker. That way I know if they have been knocked out of place.

 

Not totally correct. 884 is more for 1st gen and maybe 5 lug. I started with 885 and was very happy

The tsb will correct the sloppiness in the rear end a bit. An AAL from an OME didn't change much, but I was grinning too much from getting the lift in

 

mike what are you running? i am looking at running the bilstein 5100's with the OME 885's and a small top spacer. i want to maintain my 3" lift. also you have the toyota tsb and an AAL right? it rides good for you? let me know.

if i do pick all this up anyone want to help me install it all? i have most of th tools but not all of them.

 

anyone form skagit, island, or whatcom county want to lend a hand this weekend on my walbro 255 fuel pump swap out? i was going to attempt to remove the bed and do it solo but that was a no go and i will need more hands. Ill buy the pizza!I also have some trd all weather mats the thick rubber ones that got replaced by my weathertechs that i will give to whoever wants to lend a hand.

 

Sounds like a fun project! I'd be up for helping if I was closer.

 

ive got one done, waiting for the last coat on the other to dry for a day before reassemble.

 

You can just drop the tank instead of taking the bed off. Either way, Don't forget to disconnect the filler hose.

Looks good. On a side note, I'm leaving tomorrow so everything is as planned. I'll call you on Sunday evening.

 

OK guys, ill give ya first crack at this stuff i need to sell.

ALSO have stereo stuff for sale, AMPS SUBS and ALL WIRES for more the 50% off

EVERYTHING IS NEGOTIABLE WE CAN MAKE A DEAL!!!!!!!!!!
Willing to make package deals for multiple items as well!!!!

The list:
Factory radio, silver, single disk, NON JBL. $40-50 plus s&h
IPOD/AUX input for factory radio(plugs into CD changer port) $15 plus s&h SOLD!!!
TWO factory toyota emblems. $10ea or $15 for both plus s&h
Step/Nerf bars off an Access cab, been used so maybe $75 plus s&h (willing to meet in person if interested withing 30 miles or at meet)

Have factory chrome rear bumper and hitch up for sale as well. Make offer.

Paintball stuff:
Gloves $10 plus s&h
Mask (used rough, still serves its purpose) $15 plus s&h
2 view loaders, 1 is a gravity feed, other is a auto feed. $5 gravity feed, $15 for auto feed
1 12oz CO2 tank $10 plus s&h
1 3000psi NO2/compressed tank $20 plus s&h

Paintball Guns:
JT 3.0 paintball gun, ALL STOCK $50 plus s&h

Smart parts ION, upgraded trigger to a NEW DeSIGNZ Roller SAW Blade (trigger retail is $40) also have stock trigger, the upgraded trigger has less then 1mm pull so it shoots SUPER fast. ION gun package comes with the following.....Manual, catalog, service kit(allen wrenches, lube elbows, air lines) Barrel cover, and original box. $150 plus s&h

Facts about the ION:
180psi operating
Uses NO2/compressed air
4 fire modes with board (Full auto, 3-shot burst, Semi, Rebound)
17 balls per second
HAS VISION EYE!!!

Anyone that purchases a paintball gun will also get as much paint as i can fit in the box for free.

Any additional Info or pictures please dont hesitate to PM me and will get back to you.

 

Alright, talk to ya sunday.

 

If that ipod connection charges too... I'll take it

 

Ill shoot you a PM in a minute.

 

Kyouto42,

I finally found the manual online, it says it charges the IPOD. The unit also has an AUX 3.5 input for not IPOD devices.

 

I'll give you the complete list once I get back to the office tomorrow

 

I just lowered the tank. Put a jack under it and remove the two straps and filler hose. It comes right down. Swap the pump out and jack the tank back up. It's much easier if you run the tank dry first.

 

I am so confused with your guys OME talk.

 

From what I read, the 884's are the 2nd gen... they're just borderline too soft and a lot of people seem to prefer the 885's for a stiffer ride. The 886's are really only for armor/winch applications to support the additional weight. It's a personal pref.

 

OK yeah was wrong sorry

For what it's worth, Wheeler's has discontinued the 884 it looks like.


I updated my build with the list of lift parts I have. Sorry I didn't measure the spacer, but it's basically the same you'd get in the Wheeler's kit.

 

so i went with a buddy and one of his friends to run dogs on bobcats. both had Toyota's so i thought i would share the stories and photos.

we go to the hunting area at 7am (after driving 30 miles in 1 1/2 hours due to unexpected snow and slow drivers). right as we got there, we put the dogs on the box and not 5 minutes later taylor (the strike dog) lites up, we let her go and not 2 minutes later she is no the cat so out go jasons (my friend) other dog (slick a 8 month old pup, and Erics 3 dogs. pretty quick the race is on but we loose track of the dogs.

after a few hours of hiking around trying to figure out where the dogs are we locate 2 of erics dogs (they lost the track and did not make the race), finally at 12pm we make it to the dogs! to our dismay the cats has ran into a hole and we can not see or get it out!! so we hike back to the trucks put the dogs in the box (to give them a rest) and head out to see what we can find. well what we found was lots of really wet slick snow.


here is jasons 2000 tundra (it has 35's on it) in the snow

good thing eric had a winch

anyway this is about all we found the rest of the day. all in all it was a fun day even though we had to hike close to 4-5 miles in some wet nasty crap, but that is the nature of running dogs. by the way we were out side of corvallis in the alsea area.

by the way jason just got the truck the 20's where not his choice.