What Have You Done To Your 3rd Gen Today?

Prob depends on the owner/ company.

 

For sure depends on the local Firestone. I as well have lifetime alignment and my truck is lifted. They didn’t care one bit about the mods I had.

 

Thanks!! Main thing was putting the door hardware together; the nuts and bolts were tiny. Lol but, lining everything up and getting it as close to perfect is a bit tedious as well. Especially if you’re picky about body lines etc. Other than that it was mostly “plug & play”.

 

Great looking dog! Truck's ok too, I guess.

 

Do you have the dims on the aluminum piece? (OD both sides and ID?) Now that I see it I can make that on the lathe at work if I had basic dims...

 

Two tanks, hand calcs, 19.4mpg and 19.5mpg as compared to previous for very similar driving was circa 16.5mpg. Really enjoying the way it drives.

 

Over the weekend I installed AVS in-channel vent visors, OE tailgate lock kit, OE integrated dashcam, faux-Pro skidplate, RC neoprene seatcovers, and just this morning the FSW 2020 Pro replica 16x8" wheels. Trail Edition grille and TSS garnish are still in transit to me.
Only have this one crappy pic so far.

 

this post has pics of the milled piece. https://www.tacomaworld.com/threads/a-c-drip-mod-kit….735474/

 

Nothing special:
Hood deflector, rain guards, tailgate and glove box letter inlays, rubber inlays for cup holders, door handle etc., exhaust tip, just ordered a diamond back se bed cover, that's about it

 

I didn't know there was an OE dashcam. Have you tried it out yet? Can you comment on it's audio/video quality?

 

PT949-08210 for the cam, PT949-35220 for the Tacoma-specific harness to plug-n-play it in.

Only had it in for 1 day, but so far I like it. It's 1080P, 60fps and controllable from a phone app. Also has an "action" mode where it just records until you manually stop it or shut the truck off. For the price (~$250-300 depending on dealer/website) are there better cams out there? Absolutely. But I wanted to try this one.

 

I can’t wait for my BAMF hybrid to be ready for pickup. Went with the full hoop design. Got all my DD lighting and my Warn 10S waiting in the garage. The struggle is real with the wait but will be worth it.

 

What's your height when you have a tent on the rack?
I have the same suspension with a diamondback back and front runner bars. I would like switchover to a Leitner rack soon but my new house has a shortish garage door opening. I'm afraid my ikamper on a Leitner won't fit.

 

Not the OP.
If you have a centre mount garage door motor then look into replacing it with a side mount LiftMaster. It is super quiet and frees up space above the garage door for shelving etc.

 

Where did you get the wheels? I like the bronze and I think it would look pretty good with my lunar rock. Don’t want to change tires since my truck only has like 150 miles on it. Just don’t care for the stock OR wheels.

 

I do have them on there pretty good mostly cause of the extra wiring to the auxiliary fuse block and the jostling when I drive off road or in the desert. Is there a torque spec for the battery terminals? I didn’t even realize how pinched the connections were until you mentioned it

 

I used lamin-x to make them amber

 

Sweet, Thanks!

 

https://factorystylewheels.com/wheel-styles/toyota-fitments/

10% off and free shipping right now, they come with TRD-logo center caps too.

 

AJT Key Fob Case