Rough Country Vertex coilovers???

I’m using All Pro Expedition leafs on mine.

 

Another option it take it to a spring leaf shop and have them either add a lift or re-arch?

 

I heard that the aal will eventually do it as well looking for a leaf pack for 3in lift

 

I got the rough country leaf springs. It lifted it 3.5", but when I add a lot of weight it goes down. Though I have sumo springs so, it might even go more down. I love them though. Rides smooth, I got them because I don't carry alot of weight. Only when I go camping. I also wanted ones that matched the height of the vertex rear shocks. The other brands mention 2.75 or 3". They ride great though with weight or no weight! Affordable compared to other leaf springs aswell, also my rear doesn't have taco lean either

 

Do you have the 3in vertex? If so is there rake with the RC 3.5 leaf pack

 

I have 3.5" in front I think the back sits like .5" higher but you can't really tell. Sometimes it looks like it's higher in front sometimes looks higher in back . I have a little bumper in front and a rear bumper aswell.

 

I have the 3.5" Vertex lift kit on mine. Had the same taco lean, had a shop adjust the drivers side height and it was all fixed. My kit came with rear leaf springs and it seems to fit fine, no rake.

 

So I got the Dakar ome leaf pack and the lean is still there at this point I’m going to shim the bed anyone ever had to do this after allt he steps I’ve taken, if so what did you use thanks again folks

 

Post some pics

 

What setting to you have the adjustable at?

 

Right now 2 in front and 4 in rear....I feel like my coil overs are pretty stiff that's why I have it at 2.

 

does it low to high is softer

Okays, I just got everything installed, lower the number the softer it is?

 

This is correct 1 is soft 8 is firm

 

Let me know how it rides...ever since i added mine my front feel pretty stiff....the rears feel good. I just have a small front bumper...sometimes I feel like my 5100s and 886 coils felt better in the front

 

I run 2 front 2 rear

 

I run 3 in the front and 1 in the back.
Just a winch and hidden winch mount for now. Front bumper on the way though

 

Question for anyone whos installed the full kit with rear leafs. I looks like my back tires stick out more than my front tires. Im wondering if this is due to the 3.5" in the front since the rear is only lifted 2" i think with the AALs. Anyone else notice this? They stick out about the same for both rear tires so I dont think its a bed alignment issue. My best guess is the higher lift in the front is pull the wheels in more> Any thoughts would be appreciated.

 

Lift won’t make tires stick out more or less. The 3.5” will settle to close to 3” or atleast mine did. I’m on a OME medium duty leaf pack and my rear is roughly 1/2 and inch higher than my front.

 

So then what do you think is causing my front wheels to longer stick out as much? Or am I just imagining things lol