NW WA Meet / BS Thread

Two Ds for a double dose of pimpin

 

Depending on plans, I may go. Hope it's actual cool Japanese cars, not some guy's WRX with a BOV and Tein's.

 

Make your whip a little longer so you don’t have to kneel or bend over.

 

Maybe, but at this point, I'd rather sink the money into building my 4-way. That 25 footer will eventually be chopped to help with that build.

Also the rice paddy squat is perfect for this task.

 

no problem! I ended up only sitting around for about 30 minutes, luckily my wife was free and drove a gas can out to me. It was a shot in the dark to see if anyone was around that area anyway.

 

There's a few st205s going....

 

Woodinville GTG thread for 7/31: https://www.tacomaworld.com/threads/wa-july-meet-july-31st-12pm-woodinville-cut-shop.772374/

 

Swapping to disks in the rear in the next couple of days when I can sneak the time in, pretty stoked

 

Any particular kit you’re going with? Are you on the stock setup in the front still?

 

Doing the Trail Gear kit that uses GM hardware. Won't have an ebrake, but will be doing a line lock/hydro ebrake someday in the future. Reason being, I have had nothing but problems with the drums, which sucks because with the years Ive ran pre-05 axles, I haven't had one issue.
Still stock stuff in the front with slotted rotors/towing pads

 

I put that spooled D44 with discs in my 96’ about 9 years ago and said one day I’ll line lock it. Still not done

 

Anyone want my stock rear brake hardlines before I toss them?

 

should set one up for later august!! Ild love to show off….whoops meant see everyone’s truck…lol. But I feel like it’s been a long time since we’ve had any taco meets.

 

I'm down. I haven't seen the new rear suspension yet

 

So looking for help. Have ADS shocks and Wheeler bump stops with u bolt flip kit to install.

 

I can maybe help on 8/6-7.

Flip kit should be easy, climb under truck and loosen and remove stock ubolts/bumps and install new stuff. Shouldn't need to jack up or anything. The weight of the truck should keep the leafs on the axle.

 

You know where I live.

 

Sounds like I’m getting my Tacoma back. So it’ll be up for sale again pretty quickly

 

Will have 4 used 35x10.5 Kenda up for free here soon. They are pretty beat and low on tread, but still hold air/still would use 3 of them as spares. They have been mounted on beadlocks so the bead will probably have some grooves in it, but they will still mount to regular wheels. 1 has a good sidewall chunk missing, so probably wouldnt mount nice on a wheel so will probably scrap that one.
Prefer to give to someone who has the same tires, or someone that needs a spare 35.
In a month or two I'll have a brand new one (carried as a spare, never driven on) up for sale.

 

Anybody around lake stevens have a torque wrench that reads in reverse I can borrow?