Volk racing TE 37 on my tacoma

Look up "Rigs and Churros" they're in your area and most likely someone will want the setup, GLWS

 

You the man. Thank you! Wheels are sold!

 

That will fit no problem stock. I have a 33" under mine and it's fine.

I did do the spare tire bracket relocation at the end of this post though to gain an extra inch of clearance.

 

Did you try any other exhaust before you got the Magnaflow? The R4T high clearance exhaust is a little much for me.

 

Nope. This is exactly what I wanted. Anything that ends before the rear axle (like T4R or MBRP) is going to drone. I could not even hear this on the highway in it's loudest configuration before doing all the sound deadening & intake. Since then I have dropped it down to the mid-volume level and am happy. Still have the additional muffler option which may be needed when I change out the y-pipe.

 

Thanks for helping me spend my money! The only other concern I had was that it isn’t too close to the spring hanger, since the Hammer Hangers occupy more space. It looks like it will clear.

 

Np lol. It has about an inch clearance on mine, but the tail section has a little adjustment in it to fine-tune the fit. The sound is perfect IMO. Even in it's loudest config it should be nicer to live with than the T4R setup. Good to know the hammers fit tighter though, they're on my list as well after audio.

EDIT:
To get the thread back on track, shot of mine getting aligned last week after making a grip of suspension changes.

 

Who in AZ are you using?

 

Eddie @ Forza Automotive off University & McClintock. Best in the biz.

 

Had to go bigger

 

Finally able to celebrate TE Tuesday!! Happy day all!!

 

Such a beautttt. What size tires did you end up runnin

 

Thank you! Wrapped em up in 285/75 Toyo Open Country ATIII. Tire pricing is out of control currently but I like the look of the ATIIIs so far.

 

I thought the reflection in pics was actually a decal. You might consider mimicking the reflection with some bronze.

Great looking truck!

 

LOL Looking at your Taco makes me wish I got black. Looks good!!!

 

Damn black & bronze...can never go wrong. Btw, stock pro suspension?

 

Thanks for the positive feedback! Somewhat stock... Wescott collar up front + CMC, Icon RXT (S1) in the rear + Ubolt flip and AG greaseable shackles. Rides really nice and will upgrade someday but no rush.

 

Thanks for the deets!

I'm looking into the RXT as well to go with Wescott/Eibach up front but at the same time I want to get rid of the slight rake. It looks like your truck is pretty level (which is my goal). Assuming it's usually unloaded, did you get around 1.8" lift in the rear per mfg spec?

 

Beautiful setup