NorCal - The Pay it Forward Thread

I'm probably the wrong person to ask because I've only gone to Hollister Hills SVRA for trails, which is about 90mins away and perfect for my schedule.

But when you say camp/explore/off-road.... I think it's all going to be at least 1-2hours outside of Sunnyvale.
Any non-camp/non-offroad stuff.... you can find plenty to do in the metropolitan Bay Area. I can advise on that part.

 

Yeah Hollister is pretty much the "local" wheeling option. But there are so many places within 2-3 hours it's ridiculous!

 

Any of the 1st gen folks have a drop in bed liner they are willing to part with. Im looking for a short bed, under the rail.

 

Vaiar 88p. Gauge is melted from a little whoopsie but the pump still works like a champ. Not sure if you can order parts to repair the gauge. Free.99

someone please take this so I don’t have to deal with Facebook marketplace

 

I’m in San Bruno and will take it. My work truck could use one just in case.

 

1st gen LCA...LMK

 

i think someone claimed it already via PM but we will see…

 

Free Older RCI aluminum transmission skid plate with bolts - drilled for cat guards. No issues with it just able to get newer style. I think it works with all gens Tacoma? I have a 2nd Gen. - spoken for

40mm metal ammo cans. No rust, old paint stripped off, rubber gasket still good. Had for project but going different direction.

Located walnut creek. For free to get it outta the garage.

 

still available?

 

Skid plate is pending pick up

Ammo cans still available.

 

All of this is being thrown away this weekend if no one wants.

All off my '14 at 60k
leaf springs w/60k +1-2"? AAL
UCAs
OEM ifs gravel guard (skid)
Custom? Modifed demello? Weld on rock sliders
OME 884x's mated to the OEM sr5 shocks (shocks are dead, coils are good tho)

2x. 285/75R16 toyo AT2s. They have been sitting under that tarp for 3 years... Dunno if theyre even good.

1x. OEM spare tire (no wheel) probably original to the truck lol


Tires are probably smoked. Leafs and coils MAY be useful to someone. Sliders would be ok for a project

 

I wonder if those sliders would fit a 2017…?

 

eh, no clue. if you have a grinder and a welder tho... im sure of it! lol


if you wanted to cutoff all the old legs and make new ones... that would be the way.
lengthwise they are good.

old photo of when they were on my truck

 

I’ll take the uppers and coil overs

 

All you man, you slapping on your old truck as... "replacements"? lol

 

Just so it can be pulled on to a flat bed

 

Should probably mention that my kayak (and paddles, life preserver, and other accessories) is stored at @Motofox's place currently, as pictured. The friend that was going to buy them backed out ("I've having a second kid, so I'm going to just get something with a motor at this point."), so I'm listing them now to help the homie clear out his patio.

Kayak: Pelican Mustang 100. 10', sea green, sit-in with storage, lightly used (3-4 times?), has some attached accessories (paddle and rod tethers, and tethered cell phone case). Has been stored outside.
Paddles: Oceanbroad. 90.5", black, alloy shaft. Sells for #30 on Amazon. Lightly used, stored in kayak.
Vest: Onyx MoveVent Dynamic Paddle Sports CGA Life Vest. Black/gray/yellow, size M/L. Worn once, stored in kayak.

New value is about $490 (plus shipping) from Dick's/Amazon. I'll let it all go for $300. Pickup at Moto's.

 

Edit: Ah, I see. Just realized this is Pay It Forward and not Craigslist. Oops.

 

Hey Moto, I’m interested in the sliders. Think they’ll fit an ‘06 Access Cab Long Bed? Where ya located?
I have a grinder, but not a welder (yet!)