What Have You Done To Your 3rd Gen Today?

what’s the advantage over running these vs something like Timbrens or Archive stops?

 

From what I heard Insta likes but not sure.

 

that’s kinda what I’m getting at. I installed Timbrens when I swapped leafs and u/bolt flip kit, and they’re beefy AF. Not sure these are an upgrade…ymmv

 

Also possible extra problem if they leak. They do look super cool not going to lie. I got some Duro bumps on the way… we’ll see

 

I'm in the process of testing these also. Mine are set up to a on a 2 lead wiring harness, to the aux box, to a ch4x4 switch in the cab for a simple on/off set up, no temp switch. Mine are more for slow crawling or when you're stuck on a trial waiting for everyone to clear an obstacle. I have an ultra gauge in the cab monitoring engine temps. Have you seen any difference in temps yet? I know they are far from the condenser I'm just not convinced they are good enough quality to be up against the condenser for highway driving at speed. I can confirm that they do fit up against it though. I cant get them any closer as my winch box is in the way.

 

For me after I had the Archive Garage shock relocation installed I was hitting the shocks while flexing, and the bumps were on the frame, but I still had a ton more travel available in the shocks. So I added spacers and these in an attempt to get the most flex possible. These will allow you to adjust to maximize travel while not hitting the shocks. Basically more adjustability.

 

Installed Rough Country rock lights last night, soon hope to be installing lift and tires!

 

Nice

welcome

 

Kicker tweeters and ditch lights

 

And done for now still need to clean it up and wire the lights up..

 

Got one Clazzio PVC seat cover in and a the back seat head rests. My fingers!!!! They look good, but wow are they a chore to get in!

 

Where’d ya get the left side switch panel you used to mount the switch pro?

 

Right here!!!!!
Or if you asking about the face plate part that’s here
https://caliraisedoffroad.com/products/2020-toyota-tacoma-switch-pro-mount

It does require some slight trimming with an Sharp knife but it’s nothing difficult takes 30 seconds

 

Installed S&B Intake with Dry Filter. Pretty simple install.

 

did mine about a year ago.......sounds wonderful!

 

Washed it



Been kind of neglecting it lately with all the tundra stuff I’ve been doing. Thought I would show it a little bit of love

 

i may have saved some lives today

 

I mean, you’re not wrong…

 

Yeah sorry I was referring to the face plate lol Hard to find good ones with just the right combo’s needed. Thanks!