AZ BS Thread 4²0

You should see the MILFs that roll up asking me about my “mom ride”



sorry I couldn’t hear you from your garage waiting on parts.

Ill be at the mall

 

Talked to a neighbor and it sounds like it was randomly. Gonna call the military base on Monday and let them know about it in case their trucks across the street are riddled with holes.

 

way too little driving going on to do anything more than maintaining and fueling up a few times a year.

 

for other people offering me suggestions I didn’t ask for?

nah, that only encourages them to keep doing it.

 

Twinsies? But I agree.

 

That time of year again.... Do we have a HVAC "guy" in the group? I used to call Brian but i don't think he's around anymore..

 

No but change your capacitors. All of them. Typically solves most issues. You can get them at granger

 

I was thinking the same but i literally just had the AC units serviced last week and they replaced all of the caps.. frustrating.. got a call out to the company but they aren't open on sundays.. Was just looking for someone t ocome put before the wife and two daughters start looking to put a head on a pike...

Anyone know of a place where I can get a cap today?

 

Have a volt meter that you can test the capacitors with? Need to have an nF test on it. Can test them to make sure.
Also, can whack on the relay contactor. May be stuck keeping one leg open.

 

I'll try the relay whack... but it's the outdoor condenser fan, i woke up to hearing a loud humming noise and the condenser fan was barely spinning.


*** Edit... So I replaced the condenser fan run cap. Seems to have fixed the issue with the fan making a whining noise while trying to spin up... Fingers crossed that was the issue...

Also in case anyone is looking for a cap on the weekends, some ACE Hardware stores carry them, that's where I found mine.

 

Most AC caps are dual caps. So one leg is for the compressor and one for the fan. So still a possibility.
Just trying to think of stuff until you can get someone

 

Changed my oil yesterday, turns out I do mob hard enough to need a fuel tank skid.

The stock splash guard is all crunched and dragged.


I need to find one that tucks up nicely against the tank though, apparently the RCI hangs down much further than the stock splash pan thing. With me being only 1" lifted over factory, I'd end up losing ground clearance.

 

Damn those speed bumps

 

I know! I'm gonna have to go full Karen and complain to the mall's manager.

 

Well shit. Turns out it’s the condenser fan, new cap worked for about a hour then fan is now seizing up.

 

damn.

 

Maaaaaaan this Artec skid kit...

Why everything gotta cost so much money though!!? It's like $3700 for the full kit, $900 for the tank skid alone. Really damn well designed though.