Dobinsons 2nd Gen Tacoma Suspension Options

Here it is. Could be as simple as a clip liner missing (available from Dobinsons), or something else loose.

 

Well this sucks.

 

Could use some foam on top for shipping. But that’s just cosmetic.

edit: not trying to take away from that sucking, because it does suck when something new is dinged up.

 

yea not worried, whatever, its going to get more abuse than that so no problem. it happens.

 

just a quick question for anyone who might know. the ims shock. if i use my ome 886 spring do i still set the seat height at 8.89"
I'm looking to get 2" of lift

 

I'd start at the standard coil seat height of 213mm

 

yes. that is what I was thinking, start at a lower seat height and them go up from there. Thank you for the speedy replay and ignore the dm thanks.

 

I got my dobinsons suspension kit from from crikey....he always is helpful and answers my questions ...ships quickly ... he'll send you straight on down the right track ..



Front ims struts
Front spring c59-350.platebump/winch/AMGbatt
Smiity compressor..

Rear leafs 111r
Rear shocks twin tube ..

 

Getting thru my messages as I can...

 

Nice! How do you like the ride?

 

Or use the height you used before when you had the 5100's

 

She's all dialed in ...smooth ride on road ...performs great offroad .. it really shines ...hovers on cords ...

 

with the 5100 I had it set to the 2nd notch. I'm going to try 8 3/8th's of an inch and see. thank you.

 

just an fyi for this thread.
with the ome 886 springs I set the seat height to 8".
that gave my uca spc a perfect level position and my cv shaft perfect leval position
of course it sacrificed lift but that is another topic.

 

Just a question I'm sure its hear but could not find it.
for every turn of the adjuster, how much lift increased of decreased.
so if I turn the adjuster up 1 full turn how much more lift dose that equal?
thank you. I thing I heard somewhere or read that its 1/16th of an inch just want to confirm.

 

I've never measured it and it's not something I'd use. I would just add height, and it's a 1:2 ratio, so 1/4" added gives 1/2" of lift

 

Perfect thank you.

 

Just an FYI for any Canadians ordering IMS shocks.
Nothing bad just what to expect in dollars.
Around 1100 Canadian dollars to your door.

 

and btw very happy with them so far. have not been out wheeling but there handling the streets and 37's very well.

 

Just to update this a bit. Went out for the first time with the Dobinsons this past weekend. Ran some trails and the shocks worked great. very happy with them and would recommend these to anyone.