What Have You Done To Your 3rd Gen Today?

you probably forgot the second fuse

 

https://tvdvinyldecals.com/collecti...yl-glove-box-insert-decals-2016-toyota-tacoma

 

OEM power tailgate lock and Mountain Hatch cover.

 

that I did. The problem now is the 10amp factory fuse does not fit all the way down into the 2nd slot on the add-a-fuse. The little pins are too short.

 

Tried the 10a INJ slot?

 

When I used that slot the truck would not turn over. Again, it's probably from not having a 2nd fuse in the add-a-fuse.

 

@Taco & Salsa

Does this help any?

https://www.tacomaworld.com/threads...some-suggestions-anyone.675865/#post-23776913

https://www.tacomaworld.com/threads...some-suggestions-anyone.675865/#post-23787746

 

Debating on that one or the Trailgate. Leaning towards the Trailgate for functional drink holders.

 

Started trimming the rear bedsides/flares today

 

Correct I didn't use the factory fuse either . Can almost be certain the extra fuae is the problem. Just run to the store in thr morning get a longer fuse and you eill be set before you leave the parking lot

 

Yes it does thank you!

 

Screw that. Walmart is still open. I want this done!

 

I think a 15amp is required for the raptor lights and a 10amp fuse to replace the taken out?

https://www.tacomaworld.com/threads/new-raptor-lights-for-the-pro-grille.578738/page-7#post-19478649

 

You are correct sir

 

FUCK YES MAN!! Looks great! One of my next mods. What did you use to cut?

 

You did a great job cutting it so that the it still followed the line of your high clearance bumper and then mimicking that cut on the front of the fender. I’ve wondered what to do if you have a front or rear bumper in this situation.

 

Pretty much the only things missing are any of the panels, tacopods, the hex rack, and full tail light since he did the stage 2 led tail bulbs. Was pretty stoked when I saw the truck in person.

 

Thanks. Yea measure and measure again. Then maybe again.

I used a multi tool to cut the flares and a jigsaw to cut the bedsides/fenders

 

Thanks. Yea it took a couple times with masking tape and a marker before cutting. Wanted it to continue the line of the bumper but also not look horribly cut. Way to pay attention to that