What Have You Done To Your 3rd Gen Today?

beautiful truck. Congrats

 

no idea if it will fix your issue, but its worth a try.

 

This didn’t work.

 

Thank you. Been wanting an Off Road for the last 10 years off and on, and finally decided to pull the trigger after the wife kept getting upset with me for taking her 4runner. Found a deal I couldnt pass up. Especially with prices these days.

 

If you got it for less than 40k I’m going to stab you.

 

Good thing it was 41k OTD then.

 

try another fuse. I did the same thing with me. The first fuse location caused that issue for me. Try the other two . Also don't forget to add a fuse to your tie in line as well.

 

Got it on fleabay
had to make a pattern with paper first
trace on film then cut the piece
lubed the glass first with windex
so it be moved easier
pat out the big bubbles as possible with paper towel
most all the other bubbles will go away after a week
the pattern hides imperfections
can be removed and put back

2PCS Car Side Rear Window Screen Mesh Sun Shade Cover Windshield Sunshade Visor | eBay

7 dollars

 

i swapped it to the other headlight fuse and it didn’t fix it. The issue just followed to the other headlight.



These are the 2 fuses I’m using:

 

The one thing I did not do was add another fuse to the tie-in line. It only has the 15amp fuse in it. I bet that’s the issue.

 

The add-a-fuse should have 2 fuses, so I think you found your issue

 

the screws pull the bumper out like that, its all Styrofoam and plastic.......my bumper has nipples too after I took the box off......thanks damn dealer

 

you probably forgot the second fuse

 

https://tvdvinyldecals.com/collecti...yl-glove-box-insert-decals-2016-toyota-tacoma

 

OEM power tailgate lock and Mountain Hatch cover.

 

that I did. The problem now is the 10amp factory fuse does not fit all the way down into the 2nd slot on the add-a-fuse. The little pins are too short.

 

Tried the 10a INJ slot?

 

When I used that slot the truck would not turn over. Again, it's probably from not having a 2nd fuse in the add-a-fuse.

 

@Taco & Salsa

Does this help any?

https://www.tacomaworld.com/threads...some-suggestions-anyone.675865/#post-23776913

https://www.tacomaworld.com/threads...some-suggestions-anyone.675865/#post-23787746