265 or 285?

Has never rubbed at all on road or off. I’ve had an alignment done on it since day 1 and it’s been flawless.

 

Oh right the Pro comes with a lift, I forgot about that. Makes sense. Im amazed its not rubbing even offroad on 285s. Are they 285/75/R16s?

 

Ya, ko2 in 285/75/16

 

Damn, so since im still rubbing with a 3.5" lift it must be the alignment? Ive already had it aligned twice...

 

I don’t think mine came with mudflaps at all. Unless I took them off years ago and forgot

 

Might be your wheel offset, from what I read lift, 285's and 0 offset or less should not rub

 

^this^.
And a good alignment. Remember guys, a good alignment will "not" be in spec. Positive caster should be between 3° and 4°. Those are out of spec numbers. Camber and toe will be in spec though. My 285's clear, even with the factory mudflaps.

 

My wheels are on -12mm offset, is that helping or hurting in this case?

 

So next time I get an alignment, should I tell them to put the positive castor between 3 and 4 degrees?

 

Tell them to get as much positive caster as your UCA's will allow, still getting your camber and toe in spec. Stock UCA's might get a little over 2° before caster fails. That's why a lot of others get aftermarket UCA's. They allow a lot more positive caster, adjusted at the LCA's, and still get camber and toe in spec.

 

I have after market UCA so Ill definitely make sure to ask for that next time I get an alignment. Thanks!

 

Tell them to get as close to 4° as they can, adjusted at the LCA's. Not all alignment shops will adjust caster, out of spec, so ask them if they will before you have it done there.

 

Helping your case.

 

Good to know, thanks!

 

What cap is that you're running?