TRD/ Magnuson 4.0 Supercharger Tips, Tricks, and Mods

@Camby I would be happy to help you out. Lots of options available. Send me a PM and I can go over with you some of the options available to see what fits your needs. We have a very solid calibration available for the 2.8" setup.

 

You're the best Justin, thank you

 

Opinions wanted.

Just mounted a quick change hub for a 2.6" pulley.
With the few incidences of pulley stud sheering, I want to choose belt length wisely.
I was running a K05705 with a 2.825" pullet and the upgraded tensioner and double bearing pulley. No signs of slippage.
I have a K060696HD on hand, but wondering if I should pick up the K080702HD.
Seems like I should err on the long side and see if it does not slip. If it does, I will step down to the K060696.
Thoughts?

 

I ran a Gates K050694 with my 2.6. No cutting required.

 

if its the gates green belt 69.5" works great with a 2.5. since they do stretch they could be great as well for a 2.6.
i need to switch mine as i believe its stretched with contact to coolant spills. im also running a 2.3 to give you an idea of what CAN work. ill try a smaller belt this week but had a hard time getting the correctly claimed 69" belt on. greenbelt does need a rib cut fwiw. just have a quality utility knife with a few blades ready and a cutting board from the kitchen. take your time, change blades every couple feet and you'll be fine. sharp blades matter. i have yet to fail a belt with careful trimming.

 

Wasn’t someone looking for this…….
https://www.tacomaworld.com/threads/oem-cv-good-condition.774586/

 

Yeah, I had tagged @12TRDTacoma in that dudes FS thread...but under 2nd gen.

Rob took a hard pass on it.

 

X runner is totalled. Part out coming soon. Who’s interested?

 

IN for X-runner specific parts

 

You looking for anything in particular? I’m gonna try to sell local stuff first obviously. But ya let me no.

 

Raises hand

 

You wanna make an offer on the whole truck and just come get it? Haha.

 

Do you have headers or manifolds?

 

Headers. Doug thorley long tubes

 

Ahh ok. I may be looking for a set of manifolds at some point

 

what you want for the engine?

Also, sorry to hear that! I feel for ya. lot of love invested here

 

I dunno yet trying to get it figured out. Probly try to sell it all together with the blower.

 

What y’all think it’s worth? I got a local guy that wants it too. I wanna get all the money but wanna be fair. I no what it would cost if you wanted to build your motor your self and go through what I did. But putting a $$ on it is hard.

 

I dont have space for another project. lol, Im just interested in the engine.