Icon RXT leaf-springs pack rebuild.

Thanks man I was just confused because on the shorter one I took out only one side has the diamon cut and the other side is straight cut it’s like that on both sides in that picture I don’t see that I live tried reaching out to icon a bunch of times they never respond

 

See in the picture the first one the flat one the fourth one down and then I accidentally put the second one on the 5th leaf down to the left side of the pic you see how the end is not diamond cut there both like that I don’t know if that means anything

 

Also now looking at it i tightened the pack before I put it on as well as I tightened all the bolts in the air instead of when the vehicle was back in the ground is this wrong? everything seems tight

 

Your going to re torque after 500 miles imo your good

 

thanks man just gotta figure out how everything goes that picture on the diagram kind of small I wish I had a more blown up detailed picture of the pack fully assembled how it came

 

Of course anytime. Which option did you go with or want?

 

I went with option 2 now I got some rake but I gotta redo everything anyways I put the shackle bolt on wrong and it’s chewing up the hangers now

 

Hey guys, does anyone know how one can find out info about parts used on this OP? Dacon seems to longer be on here or i cant specifically message him. was trying to find measurements on the brass shims used, the extended bolt on the leaf pack that was turned on the lathe, and where to acquire the plastic spacer used on the drilled end. Thank you if you can help me out. Much appreciated.