Motorcycles BS Thread 2.0

My brother lives in MA and still has an 818 area code, so it could be legit, but I’m generally an untrusting person. Haha.

 

Can't even spot the tag on the 4runner. Looks like another classic in the garage though

 

Almost missed a ride due to taking a break..

Sept 10 Philly Cheesesteak ride

@Tatts521 - maybe
@BkerChuck - better
@FreshOldTaco - IN
@4x4Runner - unknown
@w.adventures - unknown
@fatfurious2 - IN
@Built2Ride - unknown

 

https://www.instagram.com/p/ChaxkM2LhAa/?igshid=Y2ZmNzg0YzQ=

 

I would get a iron butt in. Only problem is you guys talk to much

 

just fly up and buy @FreshOldTaco 's Bolt. Or find a klx110 and ride it home

 

@03dumdum too

 

I would have to crash on your couch this time. @4x4Runner decided to move

 

he just moved closer to DC. Hes about an hour from me. You could take 95 south and dodge the 18 wheelers..


This is weird. Get it! as @spencermarkd would say. I have never heard of it.
https://newyork.craigslist.org/wch/mcy/d/brewster-yamaha-tdm-sport-tourer-rare/7520153557.html

or a single swingarm leading link front suspension
https://newyork.craigslist.org/wch/mcy/d/eastchester-1993-yamaha-gts-1000/7521539927.html

@FreshOldTaco and I saw one of these conversions before:
https://longisland.craigslist.org/mcy/d/deer-park-goldwing/7516516318.html

 

I should fly up and get that guys triumph tiger 1200

 

Oh that one I texted you about? Id have to look for his name again. It was a crazy good price, all because he was too short

 

come on already!

 

Its done sir. But turns out the instructions i was following havent been updated for the gen 2 AT. I was following instructions for the AT 1000 which had slightly different brake/abs line routing.

i got everything mocked and bled, but some of the lines were twisted so I pulled them off and started redoing it. Ran out of time before work tonight.

I will reattempt tomorrow when I wake up.

 

ahh gotcha looks good thou man!

 

Thanks! Im excited to finish up tomorrow (and hopefully not need to buy a single custom line from Galfer) and then go on a test ride!

Just found this. Maybe if I order, Altrider can refund me the difference of the line, and adjust their pricing and instructions.
https://galferusa.com/products/custom-line-builder

 

ahh nice also one tip the on galfer and the banjo bolts they use... i ordered a set and i run those lines they are awesome but for the longest time i couldnt get them to bleed or brake properly turns out the banjo bolts they sent me the holes were tiny! and only had two holes vs my oem ones are large openings and have 3 holes. two on the bolt side and one at the bottom to go into the caliper or reservoir so i had to swap back to my oem banjo bolts. other then that they are worlds better then my worn out 03 lines and now i can lock the brakes up and slide if i want to lol

 

Good to know. Was not even going to use them. I was going to keep using the ones that I have

 

gotcha gotcha

 

Teal and a beak, and it looks good?!?

https://www.instagram.com/p/CgbLy9eIfk7/?igshid=YmMyMTA2M2Y=

 

You should sell your AT and get that!