Sacramento members

Motofox has some in the pay it forward thread.

 

They have a 1-2" AAL in them, it was already installed when i bought the truck so no details about that if you care. Located in Manteca

 

Anyone looking for a 2nd gen bumper and fog lights? Just wanting to pay it forward here. Not perfect condition, but it’s decent. Must take both.

 

I have a set of leaf springs off a 22.

 

I think the secondary battery on my dual battery set up is finally toast; I believe it's pretty old (not sure when the previous owner installed it). Wondering if anyone in the Sac area has experience replacing one, or could recommend a shop that could help me out?

 

He dosnt want a shitbox. Lol

 

New taco owner checking in. Over by Mather Field.

 

Nice looking ride! And your in my neighborhood! I’m in Mather as well..

 

thank you!
Well when i say by Mather I’m really off Douglas and Rancho Cordova PKWY. Right under where the planes go around for approach.

 

Gotcha, ya I’m on the opposite side with the UPS planes. I have some CBI ditch light brackets if you plan to do some ditch lights. And I have the white Meso dome lights if you want them?

 

Hadnt really planned to do any ditch lights yet. PO of my truck had actually bought EVERYTHING that Meso Customs sells minus the switch panels and the molle panels they sell. So im let on LEDS. I appreciate it though.

 

Welcome! I'm over on the western side of Sacramento.

 

A buddy of mine and I went up to Jolly Boys Mine in Nevada county for some cliff jumping, trail riding and camping. The mine is at the top of a pretty rocky 2-3 mile trail. Beautiful area and good times…

 

Wow. I really need to get out more now.

 

The world is your oyster!

 

Near maybert rd?

 

Anyone in the Sac or surrounding area with Dobinson MRA adjustable suspension on a Tacoma I could take a look at. I'd bring a six pack over to crawl under it and ask a bunch of questions.

 

I'm about to install new coilovers with 2.5ish lift and SPC upper control arm. I wont be upgrading tires yet, but will be bumping up to 255/85r16 in Dec or Jan. At that point I'll be sticking with stock OR rims +25MM Offset. Where have Sac people taken their trucks with a SPC UCA and what kind of costs were they looking at? What setting on their SPC UCA did they use with 33"?

Mostly looking for location and tech recommendations.

 

I installed SPC UCAs when I updated my suspension. Similar lift to yours. I run 265/70s. Will be moving up to either 285s or 295s (33s) when my Duratracs wear out.

Had my truck aligned at 4Wheel Parts. I can’t remember which setting i used, but I followed the instructions and used their recommend setting for my set up. I think it cost me like $150 or so.