Ontario BS Thread

Trying to determine OEM part number, or rockauto part to repair my exhaust leak. The gasket between the passenger side catalytic and Y-pipe is calling it quits. I’ll cut the old shit bolts out and use generic bolts to reconnect. Worried the mating flange is too out of flat to accept a new gasket.

 

Better than the decompression cable for my bike that is wandering aimlessly around Jamaica, NY. 3 weeks, scanned nearly everyday, still hasn’t left the building. Thanks America.

 

The rock auto listings have OEM pn/ grosses in the info tabs
2013 TOYOTA TACOMA 4.0L V6 Pipe Flange Gasket / Seal | RockAuto

 

Like askin’ for a “Round the World” but all you get is a Handjob.

 

How long till one of these show up at the next cars and coffee?

 

Betting October 2nd is my guess...now

 

Downshift and bi-weekly headlight replacement are my brakes.

see below

with enough funds everything is possible send to toyeclub@gmail.com and see what happens

 

Quote the job...no ruskie steel either.

 

Well set of 40s, new rear leafs… I mean it’s going to be $42069 to build this ramp

 

If you just e-transfered the tec club please pm me. I don’t have your contact so I can’t send you OF4WD stuff. Let me know.

 

Could be that magical 42069 amount for the 40s… I mean for the ramp, all for the kids…

 

Stahp. For the kids.

 

Tell me you had great weekend with one picture, broken tie rod somewhere there.

 

Second punctured MT Baja Boss?

Here's a 555 Japan inner tie rod that's beefier than OEM. Though if you're running out of travel at the inner joint, it may not be any more helpful: https://www.thewrenchmonkey.ca/products/auto-parts/altrom/srt330/

 

No, still the first one, just gathered all the parts together and it’s a lot of $$$ in one picture. Explains why I never get a chance to fly south on vacation tho…

will have to check about travel, may need to limit it like @tacoma16 did

 

^If you're in fact running out of travel at the inner tie rod joint, one expensive solution is to put a heim rod end there too with a clevis adapter... https://truckpartsuperstore.ca/prod...8-toyota-tacoma-4runner-fj-steering-kit-6-lug

 

If you want extra bite, get the 2005-2015 TRD pads. I'm running them on my 2017 and they give extra bite.

 

well I got JD heim joints at the spindle, but this is an idea for the future to find heim inners too...

 

You must work in Automotive,

because you are following a Kaizen (continuous improvement) system.

Last year you would only break 1-2 things per trip...

This last run you broke 4 things!

If that's not textbook for improved efficiency I don't know what is...

Well done Sir!