What Have You Done To Your 3rd Gen Today?

Same here. 701 squad!

 

Did you have to trim the plastic on the section where the anytime camera switch goes and please the provide link you purchased it from.

 

Damn it lol. Thanks. I had to order the polarized lens cap.

 

No. That camera button (View) is the OEM camera button for the Pros and I think the OR with the technology package has it too. Either way, there are 2 main buttons on Tacomas generally speaking. You have short buttons and tall buttons. You will usually see a reference on sites that make aftermarket buttons for 3rd gens to this.

What you see in my finished picture is all short buttons except for obviously the Auxbeam and cargo light switch, none are tall. So when you order buttons or switch plates, you need to know what you want (short or tall). So if your vendor is using the terms short or tall for a 3rd Gen Toyota, it will most likely snap right in or if it’s a switch plate they will usually use those terms too and it should just work.

What I had to trim a little was the dash inner edges because the switch plate didn’t quite snap in (slightly too big) when I replaced the OEM drivers side left switch plate. What I really had to trim was some dash mount stuff that was behind the switch plates where I decided to put that View camera button. It was blocking the switch from going in. It wasn’t the plate or the button, it was what was behind it. You can see it in 2 of the pics, 1 showing it blocking the hole and the other showing what it looked like behind the switch panel.

The switch plate was from guildoutfitters.com and specifically for my need was “Base Switch Panel for 4 Short Switches (Tacoma Double Cab)”. It was 149.99 +10 for shipping. It ain’t cheap but I got what I wanted when I wanted it lol

 

Ahhh, OK I see what you’re talking about. What he did to get that button in, was he removed the entire panel that also has the switch panel in it. You don’t have to remove that large panel to replace a button, just the switch panel and you can do with trim tools easily. I think why he did it that way was to give him more room for soldering and splicing. Your mileage may vary depending what you are doing for wiring.

 

2020 SR first set of mods after two years of driving stock. OME lift, Method 301’s, F. Wildpeak 285/70R/17s, rack, and sliders. Other than trouble storing the spare all good.

 

nice graffiti on the front license plate. There is a marker you can use

Looks good! Welcome!

 

lawn is on point too!!

 

Just finished first stage of prototyping a bikini top for my Leitner rack. Build is in 3rd gen

 

How about the flux capacitor?

 

thanks dude I have the standard cubby (see attached picture).

I have a Meso custom cubby I haven’t installed yet. I will probably install it once my Meso puddle pod light switch I just ordered comes in since the switch Meso includes won’t fit in my current set up (The blank is a skinny and the switch Meso includes is a regular like the 400W switch in the pic). So trim tool to remove the current set up is what is shall do. Also anyone with a puddle pod switch have a spot they grounded to?

 

For those of you who have moved switches from the center to the left switch area, how difficult was it? I’ve got some stuff on order and will be doing it soon.

 

It really makes a difference in my opinion. Especially here in Florida with the damn sun blazing all day long.

 

I’m in the sun a lot here in Cali lots of coastal fog too. I didn’t know it was an option until you posted it.

 

There should be a ground screw near the under dash fuse block, at least there is on mine.

 

Your last TW handle. Welcome back

 

I live in Texas, where the Summers are 6 - 8 months long and during that time, we get 16hrs of sunlight. That lens cap makes a huge difference in the daytime quality of the videos.

 

New shades. Ceramic tint, 70% over factory tinted and on front windshield, 35% on front windows. Darkest you can legally go in VA with a medical waiver.

 

Twins separated at birth...

 

Did the pool noodle mod, build and installed box for my 12” slim. Mounted amp under drivers seat. Oh and hung factory grille on garage wall