New England Mod & Meetup Renaissance group

No I've just been chasing the power wire not the dimmer haha. Mine isn't auxbeam it was a cheap Amazon knock off

 

If you go this route I recommend having some way of drying your air, as best as you can. I plumbed my air through viair's 2.5 gallon tank (the long way vertically) to try to get as much water as possible out before it goes to the sliders. It was function prohibitive to put a drain on the lowest part of the sliders. I only have a 1 fitting per slider, near the top inside.

 

Just wanted to confirm if Sat 9/17 or Sun 9/18 is best for everyone for the sept Mod day in Collinsville.

 

Sundays usually work best for me but all work and no play makes Johnny a bitch... or something like that.

If Saturday works best for the rest I'll be there.

 

Auto headlights are cool in less populated areas with minimal street lights. Say your in Foster/Gloster on rt6 cruising at 50 mph and go over a hill, headlights go from brights to lows and then back to brights without doing anything! I think they are great in that situation but around where I live they are less useful.

 

I did believe that we chose Saturday the 17th. @Cativelense will be coming as well

 

Ayy good stuff!

 

Just need a heads up. Lot of fairs going on. That we attend.

 

Saturday September 17th from 9am to whenever the mods, repairs, maintenance gets done, Collinsville CT.......will 30 days advanced notice give you enough time to pencil it in ....
Address will be given once we know who's coming

 

Pm me the address. Thanks.

 

We can start a pm next week and the address usually goes out about a week before the planned day.

 

I’ll have a 3 rd brake /cargo light to install with possibly a wire tap for the cargo light if there isn’t preexisting harness. behind the dash and headliner.

 

Shmaybe?

Back to work today... I have my hands full.....

 

Plastidip rockers aswell

 

Well the 3rd brake light/cargo light. Was a bust. My light screws in from the bed side. It is smaller than the 2020 version. So far it is the only difference between the 19’sand the 20’s that I have noticed. Might just go the bed light route.

 

Odd they would change it now...bed lights are always a bonus.

 

Any pics?

 

Yeah in 2020 they changed some third light stuff to try to alleviate the leaks. They moved the shark fin forward. Then realized after making a bunch of those trucks, that the OEM roof rack would hit the shark fin. So any 2020 made before Feb 2020 (when they went back to the old one) will hit the bed racks with the shark fin.

.... I own one of those.

 

Collinsville mod. Your gonna have to wait.

 

Whoah you skipping the fairs that weekend?