What Have You Done To Your 3rd Gen Today?

Things are way too bright anyways. I have V1. It's cool if you drop something, but if you even try to look at it, you'll be seeing spots for an hour. Same thing with the map lights.

Save money, just put in some nice VLED bulbs and be done.

 

The red is less straining

 

From where?

 

I misposted the db readings. I went from the mid 60dbs to the low 60dbs.

 

https://www.ktjo4x4.com/products/tacoma-power-folding-mirrors-3g

Only $250 instead of $500.

 

Mounted a front runner Jerry can in the back of the camper shell. I’ll be building a 12v shower and I added a on/off valve to the Jerry can as well as a quick release hose so I can run a hose off the tailgate and never have to move the Jerry can when out camping. I’m hang The shower head on that hook which I bolted to the RTT and hoping for some hands free showering.

 

Forget lining your RTT with carpet tiles!

The ultimate setup is using closed cell foam.

here are the specs below:

• Closed Cell Foam: OIL and Waterproof LINER closed-cell polyethylene foam is the best for car, Siless with an adhesive layer 100% ensures optimum efficiency and thermal insulation that could be possibly gained. The price of 1 sqft of Siless Liner with similar characteristics is more then three times cheaper! Excellent quality for less money!!
• Heat Blocker and Vibration Deadener: Effectively blocks 98% of radiant heat transfer. Siless Liner is a very versatile insulation material with excellent thermal barrier properties that will block engine, exhaust, & summer heat, ensure your vehicle stays cooler in the summer and warmer in the winter, making your ride more pleasant!
• Lightweight, Waterproof: It is a waterproof light-weight thermal deadener with highly compressible closed cell foam formulation, it absolutely doesn’t absorb moisture and has no odor, and it’s flexible which make it easy to install with or without roller.
• The operating temperature of the material is the same as of the rubber foam up to 215 degrees Fahrenheit.

should be a rad setup. I’m going to also put DEN-DRY mattress underlay underneath my mattress as an anti condensation mat.

 

Purchased a Vevor diesel heater and did some mods to it. Stoked for this winter season.

check out the video I made on it.

https://youtu.be/VwAC5ZcRRkA

 

Road tripped to Bend, Oregon for the CVT outlet sale and got a sick deal on a Mt.Hood RTT. The wife and I spent a night out in Oregon.
https://youtu.be/B55wJprkdlA

 

Added a CVT awning. Looking pretty overland.

 

How tall is your garage?

::Cries in 7ft Garage Clearances::

 

It’s 7 foot for sure maybe a tad more can’t remember

 

These look sweet. I don't miss QR at all lol, 15mm is so much stiffer.

The TMCMakes ones are really nice and he's a cool guy to work with.



I don't have any new mods that are finished to post rn, but have a few projects I'm working on. Hopefully some cool updates soon.

 

I imagine with a camper shell and a wedge camper on top of rails you gotta be higher than 7 feet. I just wish I could still fit inside my garage. Envious of your picture hah.

 

Where did you obtain the graphics? I've seen some like it on etsy made from good vinyl. I've been thinking about doing it to my Super White long bed

 

More or less the last week or two
Accutune Uca's, newer Lca's, poly cab mounts, finished my drivers side tub, built my dual cases and dropped off drivelines to be done, Warfab rear bumper (made filler plates after this photo so theres not the big bed gap, old bumper was for a higher cut)

 

Ya dude! They look sweet. 0mm offset pokes out just the right amount with 265/75/16s.

 

Jealous! Looks awesome and I bet it shed a lot of weight. That stock hood is a pig

 

Finally got my bbl done.

 

I couldn't believe how much that hood weighed when I bought the truck. It was so heavy, I thought something was caught keeping me from opening it.

Do you know the difference in weight?