ICON RXT leaf pack installed

Do these XRT springs come with bushings?

 

Yes

 

thanks for the update, about to mine and decided to go ahead and add them

 

This is how my truck sits on option 1. About 23 inches from center hub to fender.
I do off-road a lot so we will see how this holds up.
I didn’t run option 2 as I don’t have long travel shocks yet.

 

I am in need of the stage one leaf spring clamps the RXT springs come with already installed. Therefore, if anyone changed their leaf’s to stage two or three and can send me your stage one clamps you took off I will gladly pay you for them. I really appreciate any help!

 

I’m going back to stock billies up front and was curious if you guys thought option 1 would be ok in the back without looking crazy high. I have a leer cap and an awning. Bed is usually empty. Occasionally I have a rtt on top but not always. I’m just looking for a pack that will lift the back a bit but handle the weight occasionally.

 

option #2

 

Im reading you need long travel to be on option 3? i have eibach stage one.

 

No. I don't know why people put that. You just need to make sure your lift height jsnt fully extending your shocks. Everyone sees different lift numbers on these springs but generally stage 3 will sit around 3 inches higher than stock unloaded.

 

Eibach rear shock states it can accommodate 0 - 1.5 of lift so does that mean that i am fully extending at option 3?

 

Not fully extended but you'll be near it.

 

Is that what causes the stiffer ride? what would you do?

 

Do you have anything loaded?

 

No not in this pic

 

Rough ride, clunking, and possible breaking your shocks. Just buy some proper length shocks. Rear shocks are relatively cheap to replace.

 

How was the ride? harsh?

 

Not at all. When loaded have about 3/4” of rake. On loaded have close to 2” of rake. Love it

 

When loaded aprox how many lbs? Trying to decide whether to go option 2/3. I have about 300 lbs + when loaded and unloaded i have a constant 200 lb in the back. Want to go straight to 3 however I'm getting replies that it could damage my rear shock because of shock length not being enough. Want to get it done once and that's it.

 

I have about that weight when loaded. No RTT or bed rack. Just crates , Ezup cooler etc. if you plan on running RTT or constant weight like that I would go option 3. Also imo upgrade bump stops. I’ve had no issues with shock. I do easy to moderate trails plenty of flex for my needs.

 

Mt RTT is permanently on my bed rack unless i need to haul something however its rare. Alright option 3 it is. I do plan to have a decked in the future but not anytime soon and yes i have new bumps. I pretty much do the same type you do easy to moderate. Thanks for you time! solidified what i should go with!