Official* New England Buy/Sell Tacoma Marketplace

Where you at? I am heading down to aoaa Oct 15 for that weekend then down to NC. It's a strong maybe because I might need the bed space

 

Hudson Falls 12839

 

Anyone have a lead on an ARB front bumper for a 2nd gen? Willing to travel a bit for the right one.

 

@Pscdouglas im in hooksett. Wheels are off a 2011 trd offroad. Off the top of my head they are 16x7 +25 offset with a 6x5.5 lugs

 

Shenanergans - not really heading that way anytime soon.

 

SOLD
For sale: Honda 2.3 hp outboard. 2022 with about one hour on it. Long shaft. $700. Located in Mystic CT area.

 

This might help with the "look" My '02 Tacoma

I did put 3/4" Bora spacers on front due to small rub...

 

Where did it rub? in the fender well from the tire, or on the steering/suspension components. The problem I'm trying to solve is tire selection is continuing to narrow for the stock size I currently have (225/265 75 r15) so I'm looking to get into a new rim size without all the fancy beadlocks and "bro stuff". I'd rather not have to worry about rubbing, and spacers to solve it, if I can help it.

 

Still have the box?

 

Those Generals were wider than the Nitto's I was looking at but came with the TW DEAL and wore like Iron

The fronts rubbed on full turns at cab mounts and considering the Tacoma had been reframed with all new mounts a Chop was not in the picture...Bora's were purchased and were still on it when it was sold... Never a problem BUT I did check torque every time tires were rotated

 

Sadly for you no. Finally sold it. I do have an alpine HU taking up space.

 

Anyone need any parts. All steering parts in pic sold. Not much stuff but if anyone needs anything.

 

Selling my barely used portable power station, Ecoflow River Pro with Extra Battery. Link

 

Gotta price it out. I do know you’re located in greater Lowell area based on your tag, but you should put that up too.

 

All that and more is in the for sale thread on TW that I linked to. Thanks.

 

Free

Items 1 and 3 below. Used, dirty, but I BELIEVE unblemished, outside of normal wear and tear.

 

Stuff
Providence, RI
I am in Norwich, CT time to time and can coordinate there too
Not shipping anything. None of this stuff is worth it.

Tacoma/Truck/Vehicle Stuff



Soft Topper - 2nd gen cross bar - Free.50
See above picture with it.

Third Gen tailgate panel OEM - Free.50


H11 HID ballasts, CANBUS - 20$
Comes with one set of white bulbs which may or may not be near the end of their life. Also has one set of amber bulbs which are much closer to new, didn't run them much.


3/8IN drive 24mm socket 6 point - Free.50

Amber pod light covers - 10$
Have a second set, new in bag still - here's what they look like on the truck


Second Gen trailer controller wiring harness - 10$


CB Radio Setup - 150$ for all of it
CMX760 radio
3ft firestick w/ spring/connector to mount
Cali raised DRIVER SIDE light mount thing
Bootleg power connector using third gen trailer wiring harness.
Only thing missing: Antenna cable (and SWR meter to tune it).







1 1/4 in drop hitch + 1 7/8 in ball - 20$



Non-Tacoma Stuff

Ridgid Shop Vac - Free.50
Filter might be gone. Might be missing a wheel too. Works, just needs a new filter and a good clean. Accidentally have two. Have the hose somewhere around here too.


Pressure Washer Hose - 20$
Bought the wrong one. Link to the one I'm ditching

$33 YAMATIC Kink Resistant Pressure Washer Hose 50FT 1/4" M22 Brass Fitting Power Washer Hose Replacement for Ryobi, Troy Bilt, Greenworks, Generac, CRAFTSMAN Most Brand Power Washer, 3200 PSI

https://www.amazon.com/gp/product/B07HLPGWL7?ie=UTF8

Pressure Washer Hose - Free.50
https://snowjoe.com/products/sun-joe-pressure-washer-replacement-pressure-hose-spx3000-4000

(I SHOULD have a bunch of o-rings, I can replace the o-rings or give you a set)

 

Testing the waters on my cap. I used to park outside and now I park inside. I am thinking about moving to a diamondback. I would sell this with the roof rack and also have two baja designs s2 sports for chase lights/work lights which are not pictured. The roof rack is a martin OR with smittybuilt generic mounts. With a roof rack, there is about 9' of space for transporting lumber, awnings, canoes, etc. There is a small chip/crack in the back left piece from my antenna mount. It is superficial only. There will also be some pine pitch on the top due to me parking it outside. It's on the roof, but I wanted to be transparent. I think $2500 is a fair number with the rack and lights, but am open to trades that include a diamondback bed cover. I am in Sweden, Maine. I won't separate unless the cap is sold.

 

I'll take the recovery point. No rush

 

Cool - removed from post.
I'll bring it to AOAA.