Sold

Had these one my 2015 for about 5 years, probably 50k on them. The ball joints don’t have any play, but these are the basic Moog ones they used to use if you wanted to replace them. Camburg now offers a special ball joint for this arm but it’s $300 for the pair. Bushings didn’t have any play either but I’d definitely replace them, $100 from Camburg (links below). They’re dirty but the metal is rust free with no major scratches or gouges. Willing to ship L48, shipping will probably be $20-40 depending on location, will use UPS. I’m located in the Augusta, GA area. Only asking $200obo since I know they’ll need maintenance

https://camburg.com/shop/suspension/susp-control-arms/uca-parts/camburg-toyota-tacoma-05-uca-replacement-x-joint/

https://camburg.com/shop/suspension/susp-control-arms/uca-parts/camburg-uca-bushing-and-sleeve-kit/

 

Do you know if these arms will help move the wheel position further forward in the wheel well? I have 285 75 16 tires on -25 wheel. They rub in the rear to much so I took them off. I'm now trying to decide if getting arms like these will help fix the problem or am I going to need a cab mount chop regardless if I get the arms or not. I have eibach coilovers and I don't plan on having them set any higher than 2.5 inches. They are currently only about and inch. Maybe 1.5.

 

Short answer: yes

They have added caster which at ride height and normal daily driving that helps keep the tire further forward. I had mine aligned when running about 2” of lift and 4 degrees of caster. Running 285/70r17 on -10 offset I never rubbed my cab mount except when the tire was fully stuffed off road. Now, obviously this depends on vehicle lift, wheel/tire combo etc so I can’t guarantee it won’t rub…but there’s a reason why everyone runs aftermarket uca’s w/ lifted tacos

 

Thank you man. That's really helpful. I appreciate your in depth answer. I'm not far away from Augusta. If they don't sell pretty quickly I'll plan to come buy them.

 

No problem. Just let me know if you want them, I’d be willing to meet up if it’s not too far

 

Awesome. Thank you. I'm just doing some research on the subject. I like to learn stuff before I throw parts at my truck. Haha. Do you ever come up to North GA? I know a few fun wheeling spots if you wanna meet up some time.

 

I hear ya. Haven’t been up there in a while, but the wife and I go to Atlanta a good bit. I’m always down to do some exploring!

 

bump