What Have You Done To Your 3rd Gen Today?

1.5 inch wheel spacers.

 

New tires and wheels, spc ucas, bilstein b8 8112 front coilovers and bilstein 5160 rear shocks. Got some icon rxt leaf packs to install but my back has had it after the last few days.

 

-greased front driveshaft
-changed front diff and back diff fluid (and took the opportunity to put Lexus plugs on the front diff)
-changed T-case fluid
-changed tranny fluid

I split it up over a few weeks on the 2000, but figured since I had to take the skids off on the ‘19, I may as well do everything in one go - took a longgg time, but should be good for awhile!

 

How many miles did u run it before changing those fluids?

 

I got it used at 39,000, changed at 45,000 and wish I had done it first thing as no way PO changed it given the color of the crap coming out

so I’ll say “before 45,000” is my suggestion

 

Nice looking truck. And sitting on a nice looking piece of property too.

 

I have the stock 265 65 17 and used this part number PT2803517002

 

Modified my left side switch panel for my off-road lights. But didn't like how the switches weren't the same between the different lights (fogs, light bar, and ditch). I got some scrap cut-off from a local off-road shop (thanks @Dirt King Fab), did some test fitting and drilling and painting and voila! I'm actually surprised at how good it looks, that's not my MO.

 

Thank you!

 

I washed it, twice. First time was easy, second time had to clean the trail off it

 

Thats pretty great. Who makes this?

 

https://www.dfgoffroad.com/102-shower-tent

 

does affect the sensor?

 

The bedrack my wife won in a raffle was delivered today, got it installed along with some stuff to make our upcoming camping trip more comfortable. Lacking a couple pieces of mounting hardware for the awning but made good progress. It's raining like the end of days down here, therefore the shitty garage pics.

 

My truck doesn’t have any sensors but I’m pretty sure it wouldn’t be an issue.

 

sensor is below the emblem

 

Towed the tractor. Had to put it in stealth mode under a tarp because I got caught in the rain today.

 

Had a good weekend, second time hitting unintentional deep water so decided to install the snorkle as a little safety buffer

 

Temporary dual case shifter boot looks a little, uh, odd


Got the new drivelines in, got my tcase crossmember all bolted back up/gusseted, started on a new trans and tcase skid, and re-re routed my exhaust.


Just need to finish the skids, and its finally time to go test wheel the 37s/tub job/duals, etc and its ready for a fall/winter of wheeling. Big Browns Camp, OR trip in 2 weeks, Moab next month, snow wheeling, and then King of the Hammers again in February.

 

2.5 years. Not a single issue here. Dark Smoke Vvivid vinyl

Every thing works and I use adaptive cruise control daily. It's even saved me from clipping a couple deer. I assume the initial posters setup is essentially the same. It sure does look nice.