What Have You Done To Your 3rd Gen Today?

Not really sure. From what I have read our factory system uses a relay, but is fused at 10 amps. The supers draw 12 amps. So could be that your not getting full power due to wire size, but I would think the 10 amp fuse would of popped already.

 

I’ve beeped it more than once. No fuse has blown. I was kinda worried other bad things were gonna happen when I cut the horn wires. I had an ‘86 Audi 4KQ and used the wrong, only one i could find, relay for the fuel pump maybe. Whenever it would hit over 4K rpms the engine would cut. Then I found the right size relay. Lots of u-pick junkyard find in those days

 

Fill your pockets with fuses and relays I still have some from 20+ years ago.

 

Oh yeah. Me too. VW emblems and door handles too.

 

Oh for the love of god

 

That looks familiar.

Friend and I flipped both of 'em. His Dad: "There's your problerm!"

 

Setup a mtb mount on my diamond back. Front fork mount from Amazon and rear wheel tray from Voodoo fabrications. Cost about $100 total for the pieces. Can finally haul my bike around again!

 

Can you still open the front with your bike attached?

 

Got hit head on at very lo speed while parked in a parking lot loading the bed. A older man said he hit the gas instead of the brake and surged over a curb and into my front bumper, grill surround etc, my plate bracket was ripped completely off. I was in shock as the truck jerked back towards me 2x. He had handicap plates so I had to keep my "ALOHA" on and not go off. Filed a police report. Not too bad damage but will definitely being looking for a slimline type front bumper upgrade if possible during the repair. Any suggestions?

 

too many distracted assholes on the road, life is too short so protect that melon

 

The pistons are on the wrong side of the pad?

 

Pics?

 

Personal favorite is the southern style offroad

https://www.southernstyleoffroad.com/product/2016-tacoma-slimline-tube-bumper/

hybrid if you dont wanna cut the front bumper as much

 

See what insurance will pay and find an aftermarket bumper. Might only cost you a little bit out of pocket.

 

What a bummer! I had someone hit me in a parking lot also. $1,100 for the rear bumper cap to be replaced and painted. I’m debating an aftermarket bumper. Their insurance is covering it though.

I’ve been considering going the slimline in the front also. I’m leaning towards the CBI covert.

 

https://www.ebay.com/itm/224805062006
It’s good not great, no hinge, doesn’t sit perfect but for 20 bucks it’s OK.

 

Yea. I like that one too

 

I think the trd badges prevented any major damage

 

I can! I just have to unstrap the back wheel. When the front opens, the back wheel just rolls back.

 

They're coming, they're coming. Got some more to apply once they come off they vinyl printer.