Clutch Accumulator Measurements

Hi all, I am making accumulator delete disks and I think they will work on a 2nd gen trucks as well.
see here: https://www.tacomaworld.com/threads...m-and-bs-thread.568303/page-154#post-27785055

Would anyone be willing to grab a set of calipers and take some measurements for me?

 

Please someone help him!

I do not have calipers but I like the idea alot and wanna know if it will work on the 2nd gen too..

I dislike the way the clutch feels but don't wanna dremmel or put a line in

 

It’s possible that I still have mine laying in the garage. I’ll look for it. But I don’t think I have calipers to provide an accurate measurement.

 

Even just pictures with a tape measure may work to know if its likely or not.

I would need a picture of a tape measure over the opening on the back of the accumulator to know if the outside diameter of the disk is likely the same size. Then knowing how thick the disk and the wire spacer are would be the next thing I would need to know.

Laying the tape measure on the back and putting 1" on one side of the opening would let me see pretty closely the outer diameter.

 

My measurements

 

Found it. I’ll get you measurements this weekend. I do have a brass slide caliper I use primarily for calipers but not one of the super accurate dial or digital ones.

 

Thank you!

I think regular calipers will be fine. For the moment just seeing if it's close, if it is I will find one to make sure it's an exact fit.

 

My clutch accum is laying on the garage floor right now. I’ve got a digital caliper and am happy to measure this afternoon if needed.

 

If you can it would be greatly appreciated!

Outer diameter of the opening.
Diameter of the inner circle.
Thickness of disk plus wire.

Those three should give me everything I need to determine if this will work.

If you want to go further the depth of the opening and the rough inner diameter of the o-ring would be beneficial

 

Here you go:

Outer diameter of the opening: 43.82mm

Diameter of inner circle: 40.25mm

Thickness of disk plus wire: 3.23mm

It looks as though it should fit, but hard to confirm with the tape measurement above.

I am happy to send my old accum to you if you want to do some additional testing. Just Pm me your address and I’ll drop it in the mail. Other that shit is going in the trash

 

Those all look to be near exact what I had for my third gen accumulator.

I would happily take it, I'll hit you up with a message

 

Just got the pictures, beat me to it.

 

Well I did it wrong anyhow, missed the plus wire measurement.

If you feel the need for another, let me know. I know mine is an older version with a different fitting. First adm kit leaked, I thought I might have cross threaded it, offered to pay for another, he sent another free. He asked for my build date, sent it with a different fitting.

 

It works!!

 

These are up for sale now in the 3rd gen section.

https://www.tacomaworld.com/threads...sk-3rd-2nd-fj-and-tundra-and-giveaway.780564/