What Have You Done To Your 3rd Gen Today?

I made her work. Like a real truck.

 

These are the bees knees

 

Cleaned under the bed caps.

 

Tinted front badge... Before and after pics

 

What beach is that?

 

Rained today here in NEPA so I took advantage and worked on the truck in the garage.

First up Installed Boomers "faux" TRD Prd Shift Knob.

Left side button Activates my 38" LED Roof Rack Light Bar. That's for those A-holes who don't know how to turn off the high beam on a dark country road. Right side is for ECT activation.










After that I installed Tacoma Lifestyle Smoked LED Third Brake Light.

 

Looks good!
I'd put a little silicone around that light. It's not waterproof and Tacoma Lifestyle knows it, but refuses to address the issue.

 

Ordered some parts for the @MESO TacoPods



Zada Tech Water and Trans Temp Sensors

$20 GlowShift 34mm 1-5/16" Radiator Hose Attachment Adapter for Water Coolant Temperature Gauge Sensor - Includes Hose Clamps

GlowShift Hose Adaptors

$14 GlowShift 3/8” Fuel Line Fuel Pressure Barbed Push Lock T-Fitting Adapter - 1/8-27 NPT Sensor Port - 304 Stainless Steel - Fits Hose with 9.5mm ID Inner Diameter - Includes Clamps

.

$10 GlowShift Transmission Test Port Sensor Thread Adapter Compatible with Dodge Ram 48RE Automatic Transmission 1994-2007.5

.

 

Mounted and fitted my Ram 1500 wheels with 255/55/18 Wildpeaks. 1.5” non-hub centric spacers. Sticks out about 1”. I’m also lowered with the 2/3.5 SOS kit.

 

How did you do that?

 

Is that a good or bad thing? I thought about getting a grey flag. The black probably can’t be seen with a tinted window

 

I got the standard also. If you are looking directly at them you can’t see the lights, there is a gap between the knobs and the screen

 

I used VViViD® Smoke Black Gloss Vinyl Headlight Foglight Transparent Tint Wrap Self-Adhesive to tint over the badge

 

Thx for the "shout out" . Glad everything went well.
Post pic of that lightbar trigger at night.

 

Realize this after I had it in. So I’ll remove it and run a bead of clear silicone around it.

 

I’ll try. But here’s all three light bars ignited.

 

Where did you get the fender decals? Thx..

 

Looking good!