1st Gen Lunchtable Thread - General Discussion

Wait how'd the boost gauge needle fall off thought you built a boostless car. Also what's up with that limited slip, is it broken or is it some sort of weird clutch based one?

 

The signature line limit is the number of Toyotas you can buy before getting investigated by the IRS

 

I tried bending conduit for the first time yesterday.

It did not go well. Those freakin offset bends man!

 

just have a beer and see if it looks alright

if it doesn't work repeat the first line

 

I also didn’t realize conduit benders were specific. Here I was trying to bend 1/2” conduit with a 3/4” bender.

 

Yep.

Also, they should have different benders for EMT, rigid, etc. If you need to do offsets, try to use 30 degree as much as possible. Makes the math a lot easier, as the distance between bends is 2X the offset distance, IIRC.

Good luck!

 

It’s a good day when you introduce girlfriend to best friend and they’re making dick jokes on the way out of the restaurant

 

its a KAAZ 1.5 way. this is how they are.


the car was a factory turbo. the rompings knocked the needle loose. LOL

 

Ahhh, yeah I've been in a Nissan 240 with a KAAZ. Might as well have been welded

 

Legally that's 20MPH of boost right?

 

yea.. probably should of flipped the plates around for 50% lockup.. but eh. live and learn.



hooks up like a mother fucker though

 

SURE! lol

 

Lmao

 

She's just way too attached.

I don't call her to me, don't lure her with anything, don't even pay attention to her at times

 

I’m great at 90’s. Don’t ask me to make any other bend. Lol!

 

I, too, enjoy not having broken bones.

 

Smh. Could of did that with one pipe and no coupling

 

Dont let the 3rd geners see. Or else you will see these in malls near you. https://www.instagram.com/p/Cia2Cr1LVaD/?igshid=MTUyMWE5Zjg=

 

Normally he's the coupling between two pipes so give him credit for sharing