Tacos in St. Louis area

Was getting ready for you to give me another set of hands

Walked yourself right in to that one

 

Tips are broken off of my pliers.

Stop running

 

https://youtu.be/eIri9YLHpOg

 

Finally assessing what’s what round here

 

Maybe I missed something but why is the front of your truck missing?

 

My son got hit by some bitch with no insurance. We only carried liability on the old Tundra. So now we have a ugly tundra

 

Oh I knew that. Thought that was your silver 2.5 gen being taken apart lol.

It's been a day.

 

Apparently they got a really good picture of the scum who is cutting cats in our parking lot today. Haven't caught him yet but this picture is being blasted everywhere

 

Fact of the day:

Sometimes when you take a poop,

Then you proceed to wipe your butt hole,

One Roll in,

And it's like you have a brown marker that never dries out.

 

thats your own fault for not using a bidet

 

@Tacomania adding that to the house mods list

 

So uh, doing the install today in the Eibach coils and nitro gear uca's.

The Nitro gears don't have instructions, and their tech hasn't called me back. So the UCA's come with 4 washers, I understand the two replace the factory washers but I can't fit 1 washer, let alone two on the inside of the arm.

There is a small gap though left. Not really sure what to do about it. Second pic shows one additional washer being usedbut then you cant get the other side on, its way too short. Tried an additional washer on the opposite side and i cant get it in there, way too tight a fit to even force it in if i wanted to.

What to do...

 

I used the washers that were on the factory UCAs. The washers that came with my Total Chaos UCAs were too thicc

 

I got both the factory washers on there. That's just the Lil gap left over.

Is it good to ride with that small gap?

 

Kinda pisses me off there's no instructions with the Nitro gears. I know 'how' to take off and install but torque specs or info on the 8 washers would be nice lol

 

Torque specs are same as factory.

 

You're not wrong. Just frustrated is all. Most the time spent today was really getting a feel 'how' do everything and not so much that any of it was hard.

Driver side doesn't have any gap, passenger side gap on the control arm is pretty much eliminated once torqued.