Firearm BS thread

Tell me more sir! I'd like a wood stock, nothing tactical. I assume y'all sell them?

 

No worries. I need to come see you. Looking on your site, I see y'all can get EAA too. I hear good things about them. It doesn't have to be a wood stock, that's just a preference. But it needs to be a hunting gun. I'm sure y'all can order me something. I'd like to spend $400 or less.

 

I have a 930 and a Panzer M4. Both are tricked out the all the extras. Both eat anything you can throw at them. The mossberg is a bit smoother and a softer shooter, but the Panzer just runs. Having shot M4s for years in the military, the Panzer clone is a perfect clone. I have modified the gas system in the 930 with OR3GUN upgrades, which increases reliability and ability to cycle low brass without issues. My next autoloader will be a 940 tactical. That gun is as close to bulletproof as under 1K can bring you. The 930 has to be cleaned every 300 rounds, and the 940 pushes that out to 1500 rounds.

 

Aaron Hogue of Hogue Inc. was the pilot of the jet that crashed at the Reno Air Races today.

https://www.flyingmag.com/reno-jet-gold-race-ends-in-tragedy/

Have a good amount of his products. Sad

 

I thought that name sounded familiar when I heard about the crash. RIP

 

So Im finally ready to pull the trigger on a can.
If I buy though someone like silencer shop and buy the tax stamp ($205) and single shot trust ($24.99) Do I basically just fill out all the paperwork though them? They will have the forms online for me to electronically fill out and sign? How do I submit finger prints and passport photos? And while waiting will they hold the can or send it to my local dealer?

Thanks for advice in advance.

 

dibs on the knife

 

Their process is pretty simple. When you complete the purchase they walk you through step by step. They have kiosks at a number of gun stores that are used for the fingerprinting and an app for your phone for getting the required passport style photo. The only part that was relatively time consuming for me was the kiosk since the closest store with a kiosk is about an hour away.

Edited to add: The nice thing about their process is they keep your prints and photo on file, so when you order additional cans you don't have to go back to a kiosk.

 

You'll probably have to talk to @Built2Ride for that one! lol

 

That's awesome. The range 5 mins from my house has a kiosk.

 

LMarshall73 already answered most of your questions but with regard to who holds the can while you wait it’s your local dealer. Silencer shop will submit a form 3 (dealer to dealer transfer) and once approved (takes a week or two) will send it to your local shop. Once they receive it you can sign and certify your form 4 and then the real wait begins.

 

If you use the kiosk everything will be digital, fingerprints and all, they will use your account info to populate the form 4, triple check all info on your account and the info you put into the kiosk, an extra 2 minutes verifying info now can save you an additional wait time if you miss something and they kick the form back.

Passport photo can be uploaded via the app.

Picking your dealer is also somewhat important, personally I would only deal with a Si-Shop dealer where I had a rapport with the dealer or someone gold level or above, the shop that aren’t at least gold level dealers probably don’t deal with the cans enough for it to be smooth.

Also, talk to the dealer about ordering through them and using Si-Shop to submit paperwork, at the dealer I worked at it was usually a little cheaper to order through us.

Once you order your can the form 3 from Si-Shop to the dealer has to be approved before you can certify (if you order from the dealer and they have it in stock you don’t have to wait for the form 3) and once you certify the form 4 you sit on your hands and wait.


If you have any more questions feel free to post up or PM me.

 

Good on you brutha! Indeed, that one stays in your Will to come to me or I can always barter with you and make it worth your while. Just let me know when lol

 

Don’t you try and sneak in on my knife connection Will

 

I'll probably be buried with that knife!

 

So if my dealer doesn't have what I need and I order directly from Si-shop, do i order only and then I'll be directly to go to a kiosk to fill out everything? Or Can I go directly to the kiosk first and place my order and do all the filling out there in one go?