Icon Suspension Ride Height Help

After a couple years, I finally got around to throwing in my Icon suspension (Icon EXT travel front coilovers w/700lb springs, Icon UCAs, Icon RXT leafs with extra leaf installed) and I'm a little stuck on the front ride height.

I currently have about 2" of rake towards the front (23 3/8" Right Front, 23 5/8" Left Front, 25 3/8" Rear), and I'd like to get that closer to 1", however I already have 1" of threads showing on my coilovers and Icon says not to exceed 1.13" showing.

I know I won't get another inch of lift in the front with the remaining .13" of adjustment in the coilovers, so do I just have to live with the 2" of rake instead of 1"?

 

Update with pictures

 

https://www.tacomaworld.com/threads...as-far-as-thread-showing-measurements.403819/
Check out post 1 and 6. Seems to answer your issue. If not might have to change to 700# springs.

 

I'll update with pics in a couple hours. Just got cleaned up and want to relax for a bit.

My coilovers came with about 3/8" thread showing, and I already have 700lb springs installed. Per the installation instructions, tech note #2 (https://images.iconfigurators.app/pdf/Icon_Dynamics/I58735C_REVB.pdf), with 1" of thread showing I'm already close to the max of what they specify.

I guess my next move would be to measure how much droop I have and adjust until I'm at 2" or reach the desired rake.

 

Remove leaves, lower the rear. Keep the front suspension closer to its designed position.