LT classifieds

I have a couple sets of springs for sale. Both King.

1. 600# 18” 3” ID. These have never been used and only installed for mock up. They were too long for my coil overs. 100.00 OBO



2. 700# 16” 3” ID. As you can see these have been used. I used them for about 10k miles. They work fine just a little dirty. Swapped to a lighter spring. For better or worse not sure yet. 60.00 OBO.

 

Did you ever put the 700’s back on and test drive it?

 

No. I found a good deal on some 600’s in the right length this time so I tried them out. I’m sure it was also the valving but the front is almost perfect now. Huge difference.

The rear still needs some work though.

 

JD Fab Long Travel Kit 2.25"
Never installed - For Tacoma 2nd & 3rd Gens. 2005-2023

-Part #: tt166l225fek - 6 lug 2.25" long travel
-Part #: tt056l934-2 - Tacoma 05+ 934 CV axle's
-Part #: tt056lsg - Spindle Gusset Kit
-Part #: tt056luag - UCA Double Shear Kit
-Part #: tt056ldstk-2 - Double Shear Steering Tab Kit 2.25" over
-Part #: tt056lbpm - 2.25" Long Travel Bypass Mount


Web address:https://jdfabrication.com/

All parts on website over $6798.00 not including tax or shipping.

I'll sell all parts (kit form, will not part out) for $4999.00... NONE OF THESE PARTS WERE EVER INSTALLED,
ALL BRAND NEW.

NO INTERNATIONAL SHIPPING. NO SHIPPING TO ALASKA OR HAWAII. SORRY


See ebay listing here:

https://www.ebay.com/itm/265893597905

 

Got any close-up pics of the axles outer end splines? A little concerning of what I see in the pics provided.

 

LOL, yeah I see what you mean. Must've been the lighting.

 

axle 2

 

Smokin deal there GLWS

 

Have you decided stay stock or go a different direction?

 

Staying stock.

 

DM comming.

 

I’ve also got the JD spec’d coilovers (2.5’s) and freebleed Bypasses that are new in the box. I’m going to make a separate listing for those tomorrow or Friday depending on available time I have.

 

King coilover shocks 2.5 (pair) -- & -- King secondary Free bleed bypass shocks. (pair)

JD Fabrication tuned coilovers 2.5 (LT 2.25) 18 x 600lbs. coils (no adjusters), and JD Fabrication tuned 2.5 -1 tube freebleed bypass shocks (LT 2.25)

These are brand new, never installed.

Web address:https://jdfabrication.com/

Sorry, no international shipping, no shipping to Alaska or Hawaii.

Ebay listing:https://www.ebay.com/itm/265898478375

 

These are the first iteration of the solo spindles without the dana hubs. Thinking of selling them and reverting back to stock as these are overkill for my truck. I've had them since 2019 and never had any issues. They give you about 2" over and 3" of lift. Located in San Diego. No shipping. I would like to get $1500 and your stock Spindles (2wd 6lug). Emphasis on the need for stock spindles as part of the deal, gusseted preferred! These are currently on my truck and we can work out when to remove them, if your serious. Thanks for looking!

 

****This listing has been revised. Axles removed.****

 

ANNOUNCEMENT‼️ Ok this is not selling any parts per say but just letting everyone know about a skill someone has…
Hey guys I just wanted to say anyone willing to travel to Flagstaff AZ for Fabricator / Fabication look up @snowsk8air2 as he does some incredible work! I’m an old fart and over w/ my 4x4 days so I went the other way and lower our Magnuson supercharged little reg. cab five lug. I had Ryan weld in notches. The notches are sold to be bolted in but there’s absolutely no way I was doing that and wanted them welded in. He welded them in completely All the way around! He does incredible work and is one of the nicest guys you will ever meet seriously a very nice guy. Plus I think he really enjoys doing this type of work. Also has some really cool parents I was lucky enough to meet! Ryan THANKS‼️

 

2nd gen front clip looking to get $600

 

1st Gen Tacoma
Heim outter tie rods for 3.5" long travel. Uses stock inners. No spacer needed anymore.

Heims included but I would recommend new ones.

You will need mis alignment spacers, hardware and the taper adapters. I actually use Tundra Lbj and drill them out, this way the taper adapter isn't needed.

Heim steering is $600 new from TC. You can get it here much cheaper if you are willing to do a little leg work.

$220 shipped Usps to Usa.

 

I also have some deaver u539/540 sua for 2nd gen.

I had a couple leaves removed but I jus tout them back, added new plastic slides and new center bolts.
Looking for 200$