Installing bilstein 4600 on my 2nd gen tacoma

Hi im having a problem installing my bilsteins 4600 in the rear. I got 3 washers and 2 coushins. Would anyone know the right assembly way. My old ones only brought 2 washers and 2 coushings. Posting a pic of reference.

 

The 3rd washer goes on the end/tip right? So the ears only use 1 washer, 1 cushion.

 

I put the washer, cushion, frame, cushion and washer and nut. But.left the 3erd one out. The smaller one is the only one that goes straight down to the head lf the shock. The other ones would not fit that low.

 

Its weird because theres only one thats goes straight to the shock head. And its the one thats different. The others 2 are the exact same fit.

 

I would take it off and follow bilsteins instructions, personally. The washer right under the frame has a collar that helps retain things and prevent premature wear.

 

The problem is they didnt come with instructions.

 

Just use the internet.


http s://www.manualslib.com/manual/2013976/Bilstein-4600-Series.html

 

And i got another problem with front shocks. The ball joint nut hits the support break line on the shock i dont know if its supposed to be like that. This has a pro comp lift kit installed a 65660k i believe. And 4600s bilsteins.