2021 Tacoma wouldn’t go forward only reverse

Last night I got stuck at a chic fil a for two hours because as I went through the drive through I felt like the truck felt “heavy” until it just stopped going forward. Like the rear axle wouldn’t engage or something. This happened the day before and I put it in reverse and again stuck, reversed again and it seemed fine. Thought maybe a one off thing until last night.

I just got a lift with a 2” dobinson block put on Tuesday. The block is longer on the front by 1/8”. Shop told me this is proper, as the leaf springs curvature needs to be corrected for the driveshaft angle to be parallel.

the struts were replaced with an eibach stage 2 and the truck has 21k miles.

I’m at a loss.

 

Damn, that sucks.

 

Is the dash indicator showing it’s in drive?

 

I'm going to ask the question that everyone is thinking. What did you get at Chik-Fil-A? I love their 12pc grilled nuggets, with the chik-fil-a & Polynesian sauce; with a brownie and lemonade.

 

Figure out what is happening or pull the lift out and see if they fixes the issue.

 

‘The shakes are first class.

 

split a 30 pc with my gf. I ordered a sandwich but it fell out when I pulled it out of the bag.. talk about a shitty night.

The manager saw me struggling and gave us cookies. What a nice guy

 

Yeah it was

 

I'm going to bet its your parking brake.

 

If so, what’s the fix?

 

Take it back to the shop and tell them they messed something up, if it was ok before the lift thats the issue.

 

If it were me I'd check the rear brakes by pulling off the drums quick.

 

Dobinson just got back to me saying it’s backwards but the shop swears they installed it correctly.

 

Grilled chicken nuggets just a grilled chicken breast cut up into little chunks! Don't believe the CFA marketing hype!!!!

 

what's backwards?

 

My guess is you need a extended parking brake bracket.

 

If the block is directional the thinner end points forwards.

 

Post up some pics....I am sure someone here can confirm or deny if it's backwards.

 

Yeah no the way its installed now, the block is pointing your pinion down instead of up. Idk what the shop you went to is smoking but they need to correct it

 

My bet is the parking brake cables are being pulled. You can bend the brackets pretty down to allow slack for the cables.