What Have You Done To Your 3rd Gen Today?

Lomax Bed Cover!

Wanted a tri-fold.

https://youtu.be/COYwJgYipYI

 

I haven’t given it much thought. Course now I will.

 

My first mod was the cheapest tonneau cover on Amazon lmao!! Funny thing is it’s better than the name brand I got off another guy when I had a different truck.

 

Tyger rollup?

 

I have never had a different type if roll up, but I am very pleased with the quality of my Tyger Rollup.

 

North mountain. Works good!! The emblem matches the same in our dash display lol

 

I’m in the same boat. Didn’t want to spend a bunch of money on something I’m going to remove when I can afford a topper. There’s a review on here from a guy, who lives even farther north than me, that gave a positive review years later. They get more snow, have hotter summers and colder winters than where I’m at so I figure I’ll be good.

Oh dang! You beat me by ten bucks lol

 

Are the TRD pro rigid LEDs better than the standard LED fog lights

 

Just tinted the front windows.

First one is before.

 

I told you it was cheap

 

Yes, but there are far better ones too. Google comparisons and also YouTube….lots of info out there. As most OEM things are stupid expensive, unless you get them as part of a package on the truck, there are better choices out there but may not fit so cleanly in the provided holes but that’s not impossible either.

 

For what it’s worth my leds are all h11s they fit in high beam /low beam and fogs.

 

Not done just today but in the last month she's gotten a 3" OME lift w/ UCA and HD leaf packs, Summit (SSW) Offroad Stryker 17x9 -24mm wheels wrapped in 285 KO2s, a softopper with a Datin Metal Fab bed rack, and finally a cab mount chop and a good ol pinch weld hammerin. Next I'm thinking bumpers and a RTT but those are still in the saving money phase.

 

Check out Diode Dynamics fog lights. I love mine

 

Put on a rod holder via the bed rail. Bought some cleats from Amazon and 2.5” hex bolts. Had to drill out the back end of the rod holder but very simple

 

Put some new nitto ridge grapplers on (265×75×16)

 

clamshell bearing install. now im ready for my lift

 

How did you find out you needed it?

 

Amazon

SINGARO Universal Engine Start...

$6 SINGARO Universal Engine Start Stop Button Cover, Car Power Control Zinc Alloy Trim, One Button Start Button Cover Interior Accessories（Red）

https://www.amazon.com/dp/B0B4DDMWP8?ref=ppx_pop_mob_ap_share

 

Added the Air Lift air bags I got from the forum. Everything went easy except the bolt on driver side that the gas tank blocks. Tricky but eventually got it in. Installed, tested and sitting with 5psi in each now. Just need to connect trailer with load to see how they level out a load. Btw....the Schrader fills that I mounted to the sides of license plate are not perfectly level to each other but used existing holes on backside of bumper to limit drilling through 2 surfaces.