What Have You Done To Your 3rd Gen Today?

Nice. You doing an agm battery as well?

 

Soon to be done...

 

I already had a Cali-raised relay holder. I just drilled a new hole in it to move it forward and put mine there:

 

No, its just there to keep the teucks battery trickle charged when off.

 

Just a set of 5100. I have the trd shocks but lots of sag in the front. I added a winch and a second battery unexpectedly. So the other day I was attempting to install some ome heavy springs and realized the trd only has the 3 notches instead of 5 so I need another inch.

 

What'd you do with the ray 10s?

 

They're going on @tonered 's ride

 

Might go that route. Still rocking the oem for now. My commute is so short I sit an idle fo 15 minutes every day just so the battery doesn’t die. Let’s put it this way I could walk to work if it weren’t for the river. Lol.

 

I always give a visual inspection to mine after anybody works on it

 

damn .....only used the starter once

 

Finally got my new KnuKonceptz battery terminal upgrades installed and the auxiliary fuse box hooked up. Ow I just need to my new accessories!

 

https://www.autozone.com/interior-detailing-and-car-care-products/protectant/p/armor-all-outlast-trim-and-plastic-restorer-liquid-8oz/449917_0_0
This is what I was able to find. It’s worth a shot. I still have the scratches on my fender flares but figured since it’s only plastic I’ll let it go. The painted surfaces however are a different story. My reasoning is the fender flares will just get scratched again and there’s no need to worry about rust. The clear coat on the paint however is a different story hence the 3m scratch remover. Hope this helps.

 

I see. Excellent resource there, thanks. Because of the tape I believe I will not be taking these off after all. I'll be scrubbing them down on the truck hoping to get them cleaned up.

 

Installed my Hottap


And test for my camp kitchen drawers before paint.

 

thanks

 

What material did you use?
Are you willing to share the templates used to make the coverings?

 

You got it!

 

also went a little overboard doin a chrome delete/whitening the interior