What have you done to your Tacoma today? 1st Gen Edition

Or for the same price and less labor i could just be lazy and order new hubs from rock auto

 

If you don't already have a Dremel, get one. Comes in handy for quite a few things. Good tool to have in the arsenal.

 

Man both of your trucks are sweet! Congrats on the new to you 2nd Gen!

 

Next up...fender flare restoration.

 

Hi, @betterbuckleup, I just placed the order for Alcan springs, HD for no lift. Thanks for the recommendation!

 

I think you'll be happy with them. Great customer support too

 

Lew was very quick with a reply to my online quote request, then we talked a little on the phone. I'll be going out to get a weight reading and then sending that on to them.

 

looks good, I replaced mine last year. I got tired of scratching my arm up when driving with the window down. Super simple to replace.

 

i got them through eBay - this is the full set for a 4 door: https://www.ebay.com/itm/2747512166...74sqxXiQXy&var=&widget_ver=artemis&media=COPY

Lol, yeah we’ll see. I’m replacing the bed with a flatbed within the year, so I might just see if some cerakote wipes get me there. Not going to paint them, just don’t think it’s worth all that. Balancing between being well-used but not neglected is an ongoing discussion.

 

Have you checked out the thread "Replace your Trim" in the 1st gen forum? I got a new set for under $180 but it's been a few months since I bought mine

 

I did but I misspoke. I found em on the Toyota site

 

@ToyRyd04 might be able to help. Think he's running one.

 

$169 Denso 221-3137 Radiator

Denso 221-3137 Radiator - 18" Core Height (2.4/2.7)
Denso 221-3136 Radiator - 20" Core Height (2.7/3.4)

$183 Denso 221-3138 Radiator

Denso 221-3138 Radiator - 22" Core Height (3.4)

 

Has anyone heard of using a 2nd gen TruXedo lo pro for a 5' short bed in our 5' 2" beds?

 

Not going to fit correctly. Reference:
https://www.tacomaworld.com/threads/1st-gen-bed-size-vs-2nd-gen-bed-size.9136/

 

Thanks,

Had a lead on a good priced 2nd gen lo pro. Looks like it's not just size but how the rails are secured as well. Just trying to avoid paying $500+ for a roll up tonneau.

 

Trying to find a small sheet/section of this stuff. The third gen 4Runner shift boot has it. The tacoma does not. It's similar to old school firewall/hood insulation but more like a filler/sound proofing material. I'm drawing a blank here trying to locate it - anyone knows the approximate name for this stuff? In the pic below you can see it attached to the inside of the boot.

 

Jute padding, can get it at most car upholstery places or online. Pretty inexpensive
https://www.stockinteriors.com/jute.asp?Itemid=4794

 

My google-fu has failed me this time lol

That'll work! Thanks for the link!

 

This is it or very close. Nearly identical in appearance.

$19 House2Home 24" x 6 ft. Durapad Insulator for Upholstery Spring Cover | Padding Installs Between Springs and Seat Decking of Sofa, Couch, Loveseat, Chair, and Furniture

https://smile.amazon.com/House2Home-Insulator-Upholstery-Installs-Furniture/dp/B08HN2XCTH