Truck won't start with key, will start if I jump by relay

I got a problem with my 99 tacoma 4x4 auto 4x4 cant get it to start off the key will start if I jump the relay off but other than that the relay just clicks changed it out with good relays doesnt change nothing

 

Welcome to TacomaWorld
Load test the battery at parts store

 

The battery is brand new and itall start when I jump it from the relay as long as you got the key on itall start just won't start with a relay

 

Which relay are you jumping, I'm asuming pins 3 and 5 of the starter relay in the fuse box?

 

I changed the fuse box on it now it has no spark

 

What led you to change the fuse box?
Which fuse box did you change?

 

It wouldn't start off the key so I changed the whole fuse box and now it has no spark to none of the plugs

 

I think you'll get some more help if you give us some more detail about what exactly you are doing.

You need to clear up what relay you were trying to jump, which fuse block you tried to replace, and what even lead you to try that.

Maybe provide what motor you have as well.

There are a lot of smart folks here, but they need details.

 

I solved it I changed the fuse box outside and itall crank off the key but won't get no spark

 

Then check the connections from the relay to the fuel pump.

 

Do you have power at the Black/Red wire (Pin 1) at the ignition coils? If not check your AM2 fuse 30A.

 

It's getting gas just no fire it said it had a igniter coil bad or something

 

It's a code p1300 igniter circuit malfunction no.1

 

Have you verified you have power at the ignition coils?

 

Yeah there was a ground on the plate that holds the ignition coils on it wasn't snugged up just sitting on it