Rogue Offroad Poly Body Mount Kit Group Buy -- Closed

Interesting read. Anyone running these body mount bushings + solidiffroad engine mounts here? Would be great to have a perspective on total increase in NVH.

 

Some of us have installed them. I just got mine in last week and updated the 1st Post with my impressions.

As I said, there is a more connected feeling without any harshness. I'm a big fan, but I have been fighting with the crappy stock ones for quite a while.

 

I have them with poly motor/poly trans mount, isnt too bad. At idle mine has some decent vibes throught the truck, but anything above idle is smoother/not too much louder than stock mounts. At idle its enough to make a couple loose body panels squeek/vibrate a drink decently. Worth the trade off

 

Just giving this a bump.

 

Thanks for bumping. I’m surprised so few people are interested in this.

 

You're welcome!


Same here. I thought this would really take off after the success first round.

 

add me to the list. instead of asking "why do i need these?" i'ma just go with "why not get these, they're on sale!"

 

Thanks!

 

Okay, driving me nuts. The mount under the driver side floorboard is making this annoying sound, like a creaking. Can't decide if it sounds metallic or not. Loosened and checked everything from below, re-torqued, same sound, only from that one mount. Was greased sufficiently. I might have to remove that one and double check it/reinstall. Annoying!

 

That is a bummer to hear. The cab slid into position when you lowered it with all six loose?

 

Bushing seems all lined up and seated. I towed my camper up to the Eastern Sierras as a basecamp for a backpacking trip and it started after I got back

 

Crazy. Let us know what you find.

Mine has been good so far, including a pretty decent wheeling trip. We've only had decent rain once, but they seem to have cured the squeak that I had from the rear.

On the IDK side, I think the Taco is quieter and more composed on the highway?

 

No doubt they're better, just gotta dial this one in. Before I go lifting the body again, I think I might just loosen them all, give it a little jiggle then re-tighten, probably starting with the squeaker. It doesn't sound like a rubber squeak, sounds a little metallic, maybe just binding a little on that one, not sure

 

@tonered , I'm in for the second round! Not like I have anything else to spend my money on

 

Good plan!

I did lube all surfaces that made contact including the sleeves. I used marine grease as I thought that it would not harm the material and be waterproof. Just guessing though.

 

TW is great like that!

Thanks.

 

Hey, Folks.

We're just over half way there!

 

Should I buy another 3rd gen?

 

3rd Gens be gooode!

 

So…do I need these?