What Have You Done To Your 3rd Gen Today?

Appreciate the positive feedback!

 

And it says taco on the side

 

After a lot of thought, I figured out how to build the anytime front and rear camera on my own.
Here is the list of parts I bought:
Front camera (https://a.aliexpress.com/_m0DwQHA)
Switch(https://a.aliexpress.com/_mNmdhso)
Relay (https://a.aliexpress.com/_mLDet8g)
Wiring harnesses (https://a.aliexpress.com/_m0vGHyg)
Male and female RCA connectors (https://a.aliexpress.com/_mt915lw)
20 AWG Wires (https://a.aliexpress.com/_mOKZZvi)
Diodes (

$7 (Pack of 10 Pieces) Chanzon 20SQ045 Schottky Barrier Rectifier Diodes 20A 45V R-6 Axial 20 Amp 45 Volt

https://www.amazon.com/dp/B079KJNXY3)

I also needed some general soldering equipment, wire loom, electrical tape, heat shrink, terminal connectors, etc.

I had to modify the harnesses to include output of video from the stock camera, connect the rear trigger on both ends of the harness, add a diode on the rear trigger, and splice 12v wire for the whole system.

I would say that this project is a lot simpler than I thought it would be. I simply looked at several pictures of the anytime camera website to figure how it was put together and tried it. It works flawlessly and I got to learn a lot in the process of building and installing it. The only noticeable difference between my installation and the packaged one is the button, which I admit is superior in looks but not in function.

Let me know if anyone is interested in detailed instructions on how to build this. And I will spend some time putting the information together.

 

New tires to finally replace the factories

 

Damn she looks naked Lev! Went to a good home.

 

Nice truck and wheels

 

Looks great! I like the ACLB. Unfortunately with 2 growing boys I couldn’t go that route

 

Blackout sequential turn signals
Blackout badges
Black tailgate lettering

 

The tweeters do make a noticeable difference, the kickers improved the overall range of the system so far. after having them for a little over a week, I'm happy with the set up.

 

Blaze10 17X9

 

Snapped a pic of the new headlights in the daylight, love the new look

 

This post made me wonder about the roast thread…..

 

What are you doing with those gen5s?

They are such a nice upgrade! Have you had a chance to use them yet?

 

does anybody use a good old fashioned tire gauge to air down anymore?

 

how is the public transit in your area

 

lookin good.......road noise different? does the inside of the tire have flat letters?

 

I believe it’s OEM wheels. Link to yours?

 

Are you running a dual battery setup with the OE power tray? My next big mod is going to be the second battery and any advice is always welcomed.