What Have You Done To Your 3rd Gen Today?

Vent to let heat out, also a positive pressure for the dusty roads.

 

Removed all the badges and stickers, and the drivers side rear seat.

I’ll get the sound deadening in on that area soon and then start designing the seat delete.

 

Thanks man! I went with 285/70r17 Wildpeaks. I did also have the shop do a CMC while they were working on the truck.

 

Looks good man and thank you!

 

I’ve got 6112’s on both of my trucks. You’ll love the ride!

 

That is clean, and looks good

 

4 Wheel Parts, Thanks!

 

Front camera is aftermarket plug and play, I just drilled a hole into the grille and mounted it. Does not effect the sensors performance.

 

-installed oem bed lights
-replaced oem chrome tail lights with red lens version
-installed led reverse, license plate, and all interior lights
-installed toyota black chrome exhaust tip
-added black emblem overlay over the "Tacoma". Still need to remove the V6 but don't have a heat gun

and im still debating whether to remove the 4x4 trd off road decal

 

I took the trd sport decal off my 2020 a few days after i got it. It was super easy to take off since it was hot and still fresh lol

 

Does it look cleaner? At first it was a definite but I dunno its kinda growing on me

 

The only emblem i left on was the tacoma on the side doors

 

Much better!!

 

Add a leafs and top mounts came in early.. also ended up picking up these UCA’s! Couldn’t get them off my mind after seeing them when I got the 6112/5160’s the other day

 

I'm installing mine tomorrow (on a '22). Do you still run the tailgate lock on the passenger side?
Took me 3 hours and driving around half of Denver yesterday to find the sealant they recommend for the metal clip to the body. Just because the parts website says the store has it does not make it true. And just because you call ahead and ask if they have it and they say they do also does not make it true. But the 10th place I tried had it!

 

Yes it’s still ran from the passenger side. I pretty much manipulated the existing grommet and also used RTV around the grommet to seal and stick. And just ran along the harness on the passenger side, you will be able to see where you can tuck in the wire and zip tie them.

 

Installed Magnaflow cat back.

 

Can you share with us the extension wire that you ended up working for you? I am looking to do the same. Thanks!

 

New tires. Wash and Wax. Little touch up paint on the rims.

 

How’s it sound?