What Have You Done To Your 3rd Gen Today?

Funny, that’s exactly what I just did. Specially on the TSS sensor, headlights and fogs. makes it easier to clean.

 

I just ordered one too been waiting for a long time be nice to have something different plus ect right at my finger tips

 

Yes, I'm interested. Not sure if anyone else is.

Ahhh, OK, I see another post by @bigssa here which documents his implementation more completely:
https://www.tacomaworld.com/threads/20-23-anytime-front-backup-camera.781376/#post-27942568

 

My buddy helped me whip up a tilting fridge slide with modifying an iceco fridge slide

 

I just put mine on the other day. Have to do it again because I used the 4th slot for the clip when I should have used the 3rd. The front is too high and I hate that look. Thought about a rear spacer, but I don’t want it that high. Oh well, should go easier and faster the second time around, right?

 

Bilstein 6112/5160. Fronts set at 10/9. I didn't have much lean even with a full tank. Used the jack under the lca to compress the spring.
SPC UCA. Surprisingly easy install. Passenger side was slightly harder. Used a 3/8" extension as a punch to push that stupid bolt all the way out.
Ecgs bushing. What a pita. I don't think anybody ever said how hard the axle is to get out.
@HeadStrong Off-Road 3 leaf AAL. This aal is the way to go. No cutting, direct bolt on. Took about 1.5 hours to do the rear.

Already had the wheels and tires. 265/70R17. Had to trim the bumper, remove the mud flaps, and set the caster to 3.5 to get them to clear.

 

Looks awesome. What tire size if you don't mind me asking?

 

ECTxactly! I like using the ECT along with my tune when I needed more torque and HP during heavy loads.

 

Not even the injen or s&b? That enclosed clear box adds some cool points ha

 

Interesting. I don’t remember anyone in the YouTube videos doing that step but I could be wrong. They always make it look easier

 

Placed a preorder for the big gulp cup holder from Zprecision.
https://www.zprecision.com/product/tacoma-cup-holder

Code FALLTACO for 25% off.

https://www.youtube.com/watch?v=N_j5tDuakKU

 

Installed a Midland MXT575 over the weekend. Took my time and did it right. Happy with the radio, not a lot of radio traffic in town so havent had an opportunity to really use it yet. Headed to the Ozarks on Thursday so hopefully that'll change.

 

Haha! I don't think these trucks are quite equipped to shoot flames.

 

Thanks

those are 265/70/17 tires on a 2”/2” lift.

 

I didn't actually need to cut them in half. They had 4 screws holding the two halves together. I just cut the bottom portion off (they're designed to go on yard stakes) and used the Dremel to make a notch to fit around the bolt holding the ditch lights on. Then I screwed the two halves back together.

 

i don’t remember mine saying anything about the sealant. Then again I barely skimmed the instructions and was watching YouTube vids for the install. I will show you mine underneath the truck. I have a 22 SR5 2WD LB. I’ll post pics tomorrow on how the harness wasn’t on the passenger side and the grommet did not fit.

 

I may copy that one year when I get some ditch lights. I love it

 

No sealant on mine either. There is more than one grommet under the passenger side though.

 

J-30?

 

J24