What Have You Done To Your 3rd Gen Today?

@Rock Lobster

EXCELLENT PHOTOS!

Once I do this Toyota Care 20K Scheduled Maintenance in December, the next oil change I do on Dover AFB, I will add the Fumoto Valve.

I already have the accessories like you have, including the screw-in funnel.

I have to take my time on that oil change...I rushed the last one in August and got a lil frustrated.

 

You will be happy you did. While I was under mine adding the valve, I also upgraded the filter housing to one of these.

$23 Toyota Genuine Parts - Cap Assy, Oil Filter (15620-31060)

https://www.amazon.com/Genuine-Toyota-15620-31060-Filter-Assembly/dp/B008BHP68A

It threads on and off SO much better than that cheap plastic crap that comes stock.

 

Neither do access cab 2019’s

 

Raised the rear differential breather

 

Sub amp installed thanks @jasonct for the fuel cap and pointing me in the right direction
Also reconnected the parking brake coupler that has misaligned since the lift. Self tapping screws look a lot better than zip ties!!

 

Is that an F133? I'll probably get one soon. I have a Fumoto on my 2020 Accord and don't even have to jack it up to change oil but it helps to have long arms.

 

I finally got around to removing that piece of plastic under the front bumper, installed the TRD Pro skid plate, and installed the Talons Garage catalytic converter protection plate. The skid plate and protection plate were sitting in my garage for 4 to 5 months waiting for me to get "in the mood."

 

I know the feeling!

 

I need to get out of the “mood.” Otherwise I’ll be broke!!

 

Yes sir, it's the F133

 

I wanna kick some tunes now

 

ouch!
Shouldn't be to hard to get off, good luck.

 

Big shout out to @daveeasa for having these wiring harnesses to make it possible to install oem LED headlights. Install was straight forward and pretty easy. Also installed a miller cat shield and TRD skid plate.

 

Forgot how the paint sparkles. Been a little bit since it got a bath. Found a chip on the roof

 

Put about 200 miles of Offroad driving on her.

Give me a like??​

https://www.tacomaworld.com/threads...n-3rd-gen-tacomas.779693/page-2#post-27892285

 

Over the past few weeks I have been fortunate enough to add some goodies to the Taco and I must say I’m loving the way she’s running. I was tossing up the idea of doing an LS swap (Which I still plan to do but far into the future now). It’s hard to justify pulling out such a reliable engine so “young” (Only 23,000 miles). Goodies include:

URD Spec - U Exhaust
URD Power Extractor Pipes
URD Short Throw Shift
URD Oil Catch Can
Injen Intake
CSF Performance Radiator
RIPP Coil Packs

 

Completed today!. Taped the bit to keep from going too far, good tip. Very happy with them.

 

AC here too. You can add Matt Gecko's light (which I'll do someday) or add some solars.