What Have You Done To Your 3rd Gen Today?

Its in the eye of the beholder, pun intended. Combining three different companies version of LED red may seem problematic but I thought it all worked well together. Of course there are variations, and you can control one of those by pairing VLEDs for the maps and the footwell. Know none of the individual fixtures throw alot of light around, and even together its not alot of light (or not alot of bright light) - but that's probably the point. Long answer short - I thought the different lights blended fine but you should simply try it out. Have fun with it as we wait for the dual color maps to come in...

 

wondering if the supply chain is impacting 2020-2021s and others.

 

Send it to me

 

Thanks for the thoughtful response. I went ahead and pulled the trigger on the VLED maps. You hit the nail on the head with having fun. All these little mods are just fun to play around with and for less than $30 I'm in.

 

probably these

 

Installed my TRD Pro Grille and front camera mount today!

 

Is there a reason that you didn’t center the camera in the grille?

 

I plan on running 3 raptor lights so I kept the center open for a symmetrical look in the big picture. I mention this and how I customized the bracket to fit on the passenger side in my build thread for anyone interested!

 

trim it

 

I’m trying to install raptor lights but accidentally purchased this t-tap harness instead of an add-a-fuse harness. How do I wire these to have my raptor lights on with DRL and low beams? Can I tap my side marker lights? Can anyone link a thread or video where this harness has been installed?

 

I bought them through a dealer online. It changes the whole look of the truck!

Part #: ‎PT280-35170-02

 

My recommendation would be to go this route. This harness will take the signal from the DRLs and route it to a connector that can then be used to plug into the Raptor Lights. Doing it this way keeps you from tapping into the factory harness risking damage and a resulting expensive repair. If you're dead set on tapping into a factory wire, use a

$11 Lockitt Posi-Tap 6pc pack #605/6 16-18 awg Blue

posi-tap; the needle in the tap will do less damage to the wire. I do not recommend the T-tap you posted. More often than not I've cut wires with those damn things.

 

Yes it is, made by CBI covert front bumper

 

Nice looking truck, What brand of fog lights are those and were they plug and play or a little time to install. I want to replace my led fog lights .

 

where are you from, i have some extra wiring harnesses you can have to tap into a fuse.

 

Waiting on my remote start. Should be here tomorrow

 

Key or push button start? Mines a '18 SR5 and I want remote start soon as well

 

Looks good. I’m thinking about joining the club. Is this OEM, got link?

 

"one size fits most" .....lies