What Have You Done To Your 3rd Gen Today?

The Grille (OEM Heritage/Pro | Lift Kit Version)

 

Not oem, purchased from R4T. I created a link shortcut on my initial post but if you can’t see it for some reason it is linked below.

https://runnin4tacos.com/products/t...-tacoma-2016-2021?_pos=1&_sid=59b373841&_ss=r

 

Thanks! I decided to go with FBC’s T Harness instead of tapping into factory wiring.

 

Got my AMSOIL shipment in today for my oil change so I knocked out

$35 FUMOTO F-133 : STANDARD VALVE WITH 12MM-1.25 THREADS WITH LEVER CLIP Gold

FUMOTO F-133 valve and RIPP catch can at the same time.

 

best one I've seen this week

 

Trimmed fender liners and bought a new rear bumper.

 

Got a set of 2022 TRD BRO wheels installed today.

 

TRD intake kit installed. Did not use the TRD filter, used the factory filter

 

All done some pics next to tundra for height difference

 

Mine came from cali the letters shipped separate and arrived before the grill. I had to mak a small back brace fo the A. As I recall

 

That looks awesome!

 

Looks great! That coil color looks sick with the color of your truck.

 

Thanks man, really happy with how everything turned out

 

Off topic fellas unless your wearing the costume and standing beside your Taco.

 

thats kinda personal ladybug

 

Got stuck on a nearly flat gravel boat ramp today... that was embarrassing... had to put it in 4 wheel and I didnt even have a boat trailer, I had 2 kayaks in the bed. I really really need new tires soon, I dont think im going to last the first snowfall with the ones I have now. I have 33k on stock trd offroad tires.

 

VLEDs overhead console harness for the footwell lights arrived a day early, so I took 15 minutes to knock that out. The install is very straightforward--the scariest part is getting the console off of the roof. Went to dinner and ran some errands after the install. About halfway through the night, thought the lights were a little too bright, so I turned them down to about 10%.

Also picked up my Talons Garage catalytic converter shield from powdercoat today. I asked that they shoot the metal with a high-temp powdercoat because the cats get up to about 400 degrees after driving around for a while. The product they used withstands temperatures up to 1200 degrees, so I have a 3x safety factor of sorts. I'll take some time tomorrow to install it.

Finally, I was scrolling my e-mails at dinner and I came across an advertisement from Diode Dynamics regarding their new hitch-mounted light. After reading through some of the info, I was sold. The C1R version offers a red fourth brake light (with an optional three-flash strobe on brake), a red running light, and a white reverse light. I've always enjoyed the F1-style light that some people put into the rear bumper of their WRX and the added three-flash strobe when braking makes me super excited. I'll be glad to have additional light mounted low to fill out the profile of the truck on dark nights and foggy mornings.

Pics or GTFO